Evolution of structure and properties of multi-component (AlCrTaTiZr)Ox films

被引：81

作者：

Lin, Miao-I. ^{[1
]}

Tsai, Ming-Hung ^{[1
]}

Shen, Wan-Jui ^{[1
]}

Yeh, Jien-Wei ^{[1
]}

机构：

[1] Natl Tsing Hua Univ, Dept Mat Sci & Engn, Hsinchu 30013, Taiwan

来源：

THIN SOLID FILMS | 2010年 / 518卷 / 10期

关键词：

High-entropy alloy; Multi-component oxide; Amorphous structure; Reactive sputtering; Hard coating; MECHANICAL-PROPERTIES; SUBSTRATE BIAS; THIN-FILMS; COATINGS; TEMPERATURE; DEPOSITION; CR; MICROSTRUCTURE; PERFORMANCE; TARGET;

D O I：

10.1016/j.tsf.2009.10.142

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

(AlCrTaTiZr)O-x films were deposited at 350 degrees C by DC magnetron sputtering from high-entropy alloy target. Oxygen concentration increases with oxygen flow ratio, and saturates near 67 at.%. As-deposited films have an amorphous structure. Their hardness fall in the range of 8-13 GPa. All amorphous oxide films maintain their amorphous structure up to 800 degrees C for at least 1 h. After 900 degrees C 5 h annealing, crystalline phases with the structures of ZrO2, TiO2, or Ti2ZrO6 form. Annealing enhances mechanical properties of the films. Their hardness and modulus attain to the values about 20 and 260 GPa, respectively. The resistivity of the metallic films is around 10(2) mu Omega cm but drastically rises to 10(12) mu Omega cm when oxygen concentration increases. (C) 2009 Elsevier B.V. All rights reserved.

引用

页码：2732 / 2737

页数：6

共 34 条

[1] The mechanical properties of alumina films formed by plasma deposition and by ion irradiation of sapphire [J].

Barbour, JC ;

Knapp, JA ;

Follstaedt, DM ;

Mayer, TM ;

Minor, KG ;

Linam, DL .

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2000, 166 :140-147

[2] Structural and optical properties of titanium oxide thin films deposited by filtered arc deposition [J].

Bendavid, A ;

Martin, PJ ;

Jamting, Å ;

Takikawa, H .

THIN SOLID FILMS, 1999, 355 :6-11

[3] Synthesis, structure, microstructure and mechanical characteristics of MO CVD deposited zirconia films [J].

Bernard, O. ;

Huntz, A. M. ;

Andrieux, M. ;

Seiler, W. ;

Ji, V. ;

Poissonnet, S. .

APPLIED SURFACE SCIENCE, 2007, 253 (10) :4626-4640

[4] Nitride films deposited from an equimolar Al-Cr-Mo-Si-Ti alloy target by reactive direct current magnetron sputtering [J].

Chang, Hui-Wen ;

Huang, Ping-Kang ;

Davison, Andrew ;

Yeh, Jien-Wei ;

Tsau, Chun-Huei ;

Yang, Chih-Chao .

THIN SOLID FILMS, 2008, 516 (18) :6402-6408

[5] Influence of substrate bias, deposition temperature and post-deposition annealing on the structure and properties of multi-principal-component (AlCrMoSiTi)N coatings [J].

Chang, Hui-Wen ;

Huang, Ping-Kang ;

Yeh, Jien-Wei ;

Davison, Andrew ;

Tsau, Chun-Huei ;

Yang, Chih-Chao .

SURFACE & COATINGS TECHNOLOGY, 2008, 202 (14) :3360-3366

[6] STRUCTURES OF TANTALUM PENTOXIDE THIN-FILMS FORMED BY REACTIVE SPUTTERING OF TA METAL [J].

CHANG, PH ;

LIU, HY .

THIN SOLID FILMS, 1995, 258 (1-2) :56-63

[7] Structure and properties of reactively-sputtered AlxCoCrCuFeNi oxide films [J].

Chen, Ta-Kun ;

Wong, Ming-Show .

THIN SOLID FILMS, 2007, 516 (2-4) :141-146

[8]

Chiang Y.-M., 1996, PHYS CERAMICS PRINCI, V2nd

[9] MICROSTRUCTURES AND MECHANICAL-PROPERTIES OF THIN-FILMS OF ALUMINUM-OXIDE [J].

CHOU, TC ;

NIEH, TG ;

MCADAMS, SD ;

PHARR, GM .

SCRIPTA METALLURGICA ET MATERIALIA, 1991, 25 (10) :2203-2208

[10]

Dean J.A., 2001, Lange's Handbook of Chemistry, V15

← 1 2 3 4 →