Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite

被引：523
作者：
Shi, Jie [1 ]
Sun, Xinjun [1 ]
Wang, Maoqiu [1 ]
Hui, Weijun [1 ]
Dong, Han [1 ]
Cao, Wenquan [1 ]
机构：
[1] Natl Engn Res Ctr Adv Steel Technol, Cent Iron & Steel Res Inst, Beijing 100081, Peoples R China
来源：
SCRIPTA MATERIALIA | 2010年 / 63卷 / 08期
关键词：
Ultrafine grain size; Mn-TRIP steel; Mechanical property; Work hardening; TRANSFORMATION-INDUCED PLASTICITY; DUAL-PHASE STEEL; MICROSTRUCTURE;
D O I：
10.1016/j.scriptamat.2010.06.023
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ultrafine-grained duplex manganese-bearing steels fabricated by quenching and annealing demonstrated excellent combinations of tensile elongation of 31-44% and tensile strength of 1-1.5 GPa and a three-stage work-hardening behavior. Their enhanced mechanical properties and work-hardening behavior were explained by their dynamic composition due to the strain induced phase transformation from large-fractioned austenite (>30%). It was suggested that the austenite volume fraction and its mechanical stability is the key to understand the phase transformation induced deformation behavior. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：815 / 818
页数：4
相关论文
共 25 条
  • [21] Effect of grain size on mechanical characteristics and work-hardening behavior of fine-grained Mg-0.8Mn alloy via adjusting extrusion temperature
    Li, C. C.
    Qiao, X. G.
    Sun, W. T.
    Golovin, I. S.
    Kim, H. S.
    Sakai, Taku
    Zheng, M. Y.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1010
  • [22] Low temperature macro- and micro-mechanical behavior of an ultrafine-grained metastable 304 austenitic stainless steel investigated by in situ high-energy X-ray diffraction
    Zheng, Chengsi
    Zhen, Qiannan
    Wang, Yongqiang
    Li, Na
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 817
  • [23] Effect of prior-austenite grain size on the microstructure and mechanical properties of ultrafine-grained dual-phase layer-structured steel produced by hot rolling of intercritical annealed bainite
    Sun, Junjie
    Xu, Bin
    Wang, Hao
    Guo, Shengwu
    Yan, Zehui
    Zhang, Jinhua
    Liu, Yongning
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 23 : 2440 - 2453
  • [24] Effect of the structural and phase state on the deformation behavior and mechanical properties of the ultrafine-grained titanium alloy (Ti-Al-V-M) at temperatures in the range of 293-973 K
    Grabovetskaya, G. P.
    Mishin, I. P.
    Stepanova, E. N.
    Zabudchenko, O. V.
    Ratochka, I. V.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 800
  • [25] Ultrafine-grained Zn-0.45Li alloy with enhanced mechanical property, degradation behavior and cytocompatibility prepared by hot extrusion and multi-pass drawingUltrafeinkornige durch Heissextrusion und Mehrfachzug hergestellte Zn-0,45Li-Legierung mit verbesserten mechanischen Eigenschaften, Abbauverhalten und Zytokompatibilitat
    Deng, L.
    Guo, P.
    Li, F.
    Yang, L.
    Zhu, X.
    Xu, C.
    Zhang, Q.
    Shi, Y.
    Song, Z.
    Sun, W.
    Liu, H.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021, 52 (09) : 991 - 996
123