A comparison of thermal shock behavior between currently plasma spray and supersonic plasma spray CeO2-Y2O3-ZrO2 graded thermal barrier coatings

被引：58

作者：

Han, Zhihai ^{[1
]}

Xu, Bingshi

Wang, Haijun

Zhou, Shikui

机构：

[1] Xian Jiaotong Univ, State Key Lab Mech Behav Mat, Xian 710049, Peoples R China

[2] Natl Key Lab Remfg, Beijing 100072, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2007年 / 201卷 / 9-11期

关键词：

supersonic plasma spray; functionally graded materials; thermal shock test;

D O I：

10.1016/j.surfcoat.2006.07.176

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The 5 layer structured ZrO2,-7 wt-% Y2O3-18 wt-% CeO2 (C-YSZ) thermal barrier coatings (TBCs) by currently Plasma Spray (PS) and functionally graded TBCs system (FG-TBCs), composed of NiCoCrAlY bond coat (BC), C-YSZ/NiCoCrALY graded transition compound layer and a pure C-YSZ top coat, by recently developed Supersonic Plasma Spray system with dual powder feed ports were prepared. The experiment was performed to evaluate the thermal shock resistance of two different structured TBCs samples which were heated by a high heat flux of oxygen-acetylene flame to 1250 degrees C in a time interval of 10-15 s, and followed by water-quenching to ambient temperature using a multifunctional thermal shock tester in which 4 samples can be held simultaneously. The heating-cooling curves and surface morphology of specimens can also be observed by a CCD metalloscope and recorded on line through an accessorial computer system. The results show that thermal shock resistance of FG-TBCs was superior as its surface presents only little visible cracks after 200 cycles but 5 layer structured TBCs appear obviously delaminated after only 46 cycles. (C) 2006 Elsevier B.V. All rights reserved.

引用

页码：5253 / 5256

页数：4

共 5 条

[1] Thermal fracture of interfaces in precracked thermal barrier coatings [J].

Kokini, K ;

Banerjee, A ;

Taylor, TA .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 323 (1-2) :70-82

[2] Estimating the fracture resistance of functionally graded thermal barrier coatings from thermal shock tests [J].

Rangaraj, S ;

Kokini, K .

SURFACE & COATINGS TECHNOLOGY, 2003, 173 (2-3) :201-212

[3] Plasma spraying of micro-composite thermal barrier coatings [J].

Sharafat, S ;

Kobayashi, A ;

Chen, Y ;

Ghoniem, NM .

VACUUM, 2002, 65 (3-4) :415-425

[4]

Wang Y P, 2003, J MATER PROCESS TECH, V137, P110

[5] Development and thermal fatigue testing of ceramic thermal barrier coatings [J].

Zhu, DM ;

Choi, SR ;

Miller, RA .

SURFACE & COATINGS TECHNOLOGY, 2004, 188 :146-152

← 1 →