Effect of power on microstructure and mechanical properties of Ti44Al6Nb1.0Cr2.0V0.15Y0.1B alloy prepared by cold crucible directional solidification

被引：30
作者：
Dong, Shulin [1 ]
Chen, Ruirun [1 ]
Guo, Jingjie [1 ]
Ding, Hongsheng [1 ]
Su, Yanqing [1 ]
Fu, Hengzhi [1 ]
机构：
[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China
来源：
MATERIALS & DESIGN | 2015年 / 67卷
关键词：
Titanium aluminum; Directional solidification; Cold crucible; Nanoindentation hardness; Interlamellar space; TIAL-NB ALLOYS; ELECTROMAGNETIC CONFINEMENT; TENSILE PROPERTIES; PROCESSING MAP; HEAT-TRANSFER; DEFORMATION; EVOLUTION; CREEP; PHASE; MICROHARDNESS;
D O I：
10.1016/j.matdes.2014.12.006
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A newly designed alloy Ti44Al6Nb1.0Cr2.0V0.15Y0.1B ingot was prepared by the cold crucible directional solidification (CCDS) technique under a range of input power with the constant drawing speed of 8.33 mu m/s. Experimental results show that the as-cast microcrack can be eliminated completely after CCDS, and the most desirable microstructure, a high percentage of small angle lamellas microstructure is acquired at input power of 45 kW. It also indicates that the interlamellar space gradually decreases with the increasing of power. The measurement of nanoindentation hardness shows that the hardness of B-2 and gamma phase in all cast routes is consistent, but in lamella, the hardness increase linearly with the interlamellar space decrease after logarithm. The relationship between the interlamellar space and the nanoindentation hardness was given. The room temperature tensile results confirmed with the desirable directional solidification microstructure, the highest ultimate tensile strength (UTS) value and the elongation are achieved. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：390 / 397
页数：8
相关论文
共 36 条
[1]   Orientation relationship between TiB precipitate and γ-TiAl phase [J].
Chen, C. L. ;
Lu, W. ;
Lin, J. P. ;
He, L. L. ;
Chen, G. L. ;
Ye, H. Q. .
SCRIPTA MATERIALIA, 2007, 56 (06) :441-444
[2]   Directional solidification of TiAl-W-Si alloy by electromagnetic confinement of melt in cold crucible [J].
Ding, Hongsheng ;
Nie, Ge ;
Chen, Ruirun ;
Guo, Jingjie ;
Fu, Hengzhi .
INTERMETALLICS, 2012, 31 :264-273
[3]   Directional solidification of titanium alloys by electromagnetic confinement in cold crucible [J].
Ding, HS ;
Chen, RR ;
Guo, JJ ;
Bi, WS ;
Xu, DM ;
Fu, HZ .
MATERIALS LETTERS, 2005, 59 (07) :741-745
[4]   Microstructural control of TiAl-Nb alloys by directional solidification [J].
Ding, X. F. ;
Lin, J. P. ;
Zhang, L. Q. ;
Su, Y. Q. ;
Chen, G. L. .
ACTA MATERIALIA, 2012, 60 (02) :498-506
[5]   Lamellar orientation control in a Ti-46Al-5Nb alloy by directional solidification [J].
Ding, X. F. ;
Lin, J. P. ;
Zhang, L. Q. ;
Su, Y. Q. ;
Wang, H. L. ;
Chen, G. L. .
SCRIPTA MATERIALIA, 2011, 65 (01) :61-64
[6]   Microstructure control and mechanical properties of Ti44Al6Nb1.0Cr2.0V alloy by cold crucible directional solidification [J].
Dong, Shulin ;
Chen, Ruirun ;
Guo, Jingjie ;
Ding, Hongsheng ;
Su, Yanqing ;
Fu, Hengzhi .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 614 :67-74
[7]   Ultrahigh strength and high plasticity in TiAl intermetallics with bimodal grain structure and nanotwins [J].
Edalati, Kaveh ;
Toh, Shoichi ;
Iwaoka, Hideaki ;
Watanabe, Masashi ;
Horita, Zenji ;
Kashioka, Daisuke ;
Kishida, Kyosuke ;
Inui, Haruyuki .
SCRIPTA MATERIALIA, 2012, 67 (10) :814-817
[8]   Dependency of microstructure parameters and microhardness on the temperature gradient for directionally solidified Ti-49Al alloy [J].
Fan, Jianglei ;
Li, Xinzhong ;
Su, Yanqing ;
Chen, Ruirun ;
Guo, Jingjie ;
Fu, Hengzhi .
MATERIALS CHEMISTRY AND PHYSICS, 2011, 130 (03) :1232-1238
[9]   Effect of growth rate on microstructure parameters and microhardness in directionally solidified Ti-49Al alloy [J].
Fan, Jianglei ;
Li, Xinzhong ;
Su, Yanqing ;
Guo, Jingjie ;
Fu, Hengzhi .
MATERIALS & DESIGN, 2012, 34 :552-558
[10]   The microstructure parameters and microhardness of directionally solidified Ti-43A1-3Si alloy [J].
Fan, Jianglei ;
Li, Xinzhong ;
Su, Yanqing ;
Guo, Jingjie ;
Fu, Hengzhi .
JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 506 (02) :593-599
1234