Properties of nano-SiC/Ni composite coating on diamond surfaces

被引：13
|
作者：
Xiao, C. J. [1 ]
机构：
[1] Henan Univ Technol, Dept Mat Sci & Engn, Zhenzhou 450007, Peoples R China
来源：
SURFACE ENGINEERING | 2018年 / 34卷 / 11期
关键词：
Nano-SiC; Ni composite coating; microstructure; Fe-matrix bonded; diamond tool bits; properties; BEHAVIOR; ELECTRODEPOSITION; PARTICLE;
D O I：
10.1080/02670844.2017.1376847
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A Ni coating and nano-SiC/Ni composite coating were prepared on diamond surfaces by an electro-co-deposition method. The surface morphology of plated diamond grit and the bonding state between diamond and Fe-matrix bond were characterised by the scanning electron microscopy and energy-dispersive spectroscopy (EDS). The flexural strength and wear resistance performance of the Fe-matrix bonded diamond tool bits were tested. The results showed that the nano-SiC/Ni composite coating possesses a smoother, finer, and denser microstructure when compared with a pure Ni coating. Furthermore, the nano-SiC/Ni composite coating on diamond surfaces improved the flexural strength and wear resistance of Fe-matrix bonded diamond tool bits. The EDS analysis indicated that the chemical combination between diamond grits and Fe-matrix bonding was formed, thereby the mechanical properties of Fe-matrix bonded diamond tool bits were enhanced.
引用
收藏
页码：832 / 837
页数：6
相关论文
共 50 条
  • [1] Tribological properties of Ni/nano-SiC composite coatings
    Cheng, Sen
    Wang, Kunlin
    Zhao, Gaomin
    2002, Press of Tsinghua University (42):
  • [2] EPMA analysis of brush-plating Ni/nano-SiC composite coating
    Xu, Longtang
    Xu, Binshi
    Ma, Shining
    Zhou, Meiling
    Cailiao Gongcheng/Journal of Materials Engineering, 2000, (06): : 34 - 35
  • [3] Effect of Nano-SiC coating on the thermal properties and microstructure of diamond/Al composites
    Dong, Z. Y.
    Liu, X. Y.
    Wang, D.
    Wang, W. G.
    Xiao, B. L.
    Ma, Z. Y.
    COMPOSITES COMMUNICATIONS, 2023, 40
  • [4] Wear resistance of a Ni-PTFE composite coating strengthened with nano-SiC particles
    Jiang, Wei
    Shen, Lida
    Wang, ZhanWen
    Wang, Kai
    Xu, Mingyang
    Tian, Zongjun
    MATERIALS RESEARCH EXPRESS, 2019, 6 (09):
  • [5] Preparation research of Nano-SiC/Ni-P composite coating under a compound field
    Zhou, H. Z.
    Wang, W. H.
    Gu, Y. Q.
    Liu, R.
    Zhao, M. L.
    2016 GLOBAL CONFERENCE ON POLYMER AND COMPOSITE MATERIALS (PCM 2016), 2016, 137
  • [6] Nano-SiC coated diamond particles
    2000, Hosokawa Powder Technology Foundation (18)
  • [7] Corrosion and tribological behaviour of electroless Ni-P/nano-SiC composite coating on aluminium 6061
    Soleimani, R.
    Mahboubi, F.
    Kazemi, M.
    Arman, S. Y.
    SURFACE ENGINEERING, 2015, 31 (09) : 714 - 721
  • [8] Fabrication and microstructure of nano-SiC/Ni composite coatings on diamond surface via electro-co-deposition
    Li, Zhengxin
    Xiao, Changjiang
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2015, 106 (04) : 421 - 424
  • [9] Study on preparation and properties of Au/nano-SiC composite coatings
    School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China
    Gongneng Cailiao, 2006, 2 (301-303+308):
  • [10] Investigation of the tribological properties of polyfluo wax/polyurethane composite coating filled with nano-SiC or nano-ZrO2
    Song, Hao-Jie
    Zhang, Zhao-Zhu
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 426 (1-2): : 59 - 65
12345