Electrophoretic deposition for fabrication of ceramic microparts

被引：12

作者：

Bonnas, Sylvia ^{[1
,2
]}

Ritzhaupt-Kleissl, Hans-Joachim ^{[2
]}

Hausselt, Juergen ^{[1
,2
]}

机构：

[1] Univ Freiburg, Lab Mat Proc, Dept Microsyst Engn IMTEK, D-79110 Freiburg, Germany

[2] Forschungszentrum Karlsruhe, Inst Mat Res 3, D-76021 Karlsruhe, Germany

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2010年 / 30卷 / 05期

关键词：

Electrophoretic deposition; Microparts; Shaping; Suspensions; ZrO2; Structural applications; SUSPENSIONS;

D O I：

10.1016/j.jeurceramsoc.2009.06.039

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Electrophoretic deposition (EPD) is mostly used for producing moulds and layers. The present work shows the fabrication of ceramic microparts by the use of structured electrodes. As electrode structures euro coins and spinning nozzles were used. Additionally a cost effective and simple method was developed, which allows preserving the original master mould by using microstructured silicone moulds as substrate. This was enabled by coating the silicone moulds with graphite to obtain an electrically conductive surface, required for electrophoretic deposition. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：1159 / 1162

页数：4

共 18 条

[1]

Biesheuvel PM, 1999, J AM CERAM SOC, V82, P1451, DOI 10.1111/j.1151-2916.1999.tb01939.x

[2] Application of electrophoretic and electrolytic deposition techniques in ceramics processing [J].

Boccaccini, AR ;

Zhitomirsky, I .

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2002, 6 (03) :251-260

[3]

BONNAS S, 2006, 2 INT C MULT MICR

[4] Effect of particle size distribution and sedimentation behaviour on electrophoretic deposition of ceramic suspensions [J].

Bonnas, Sylvia ;

Tabellion, Jan ;

Hausselt, Juergen .

ELECTROPHORETIC DEPOSITON: FUNDAMENTALS AND APPLICATIONS II, 2006, 314 :69-74

[5] Formation of a deposit by electrophoresis. [J].

Hamaker, HC .

TRANSACTIONS OF THE FARADAY SOCIETY, 1940, 35 (03) :0279-0286

[6] Homogeneous functional ceramic components through electrophoretic deposition from stable colloidal suspensions - I. Basic concepts and application to zirconia [J].

Harbach, F ;

Nienburg, H .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1998, 18 (06) :675-683

[7] Electrophoretic deposition of sol-gel ceramic microcomponents using UV-curable alkoxide precursors [J].

Laubersheimer, J ;

Ritzhaupt-Kleissl, HJ ;

Hausselt, J ;

Emig, G .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1998, 18 (03) :255-260

[8]

Nagarajan N, 2004, J AM CERAM SOC, V87, P2053, DOI 10.1111/j.1151-2916.2004.tb06359.x

[9]

OETZEL C, 2004, CFI-CERAM FORUM INT, V81, P35

[10]

Reuss FF, 1808, MEMOIRES SOC IMPERIA, P327

← 1 2 →