Recycling of mullite from high-alumina coal fly ash by a mechanochemical activation method: Effect of particle size and mechanism research

High-alumina coal fly ash (HAFA) is a special solid waste since its alumina content can reach 40-50 wt%, which is seen as a potential resource for mullite material production. However, obtaining an ideal mullite material from HAFA is difficult because of its low Al2O3/SiO2 mass ratio. In this work, the microstructure characteristics of HAFA were systematically analyzed by combining multiple characterization techniques. It was found that HAFA had a core-shell structure with a mullite/corundum crystal core and a silica-rich amorphous phase shell. The novel mechanochemical activation-desilication process was used to remove amorphous phase from HAFA and elevate the Al2O3/SiO2 mass ratio. In particular, the effect of particle size after mechanical treatment and mechanism of the desilication process were extensively investigated. On decreasing the particle size, a high leaching rate of alumina was achieved during mechanochemical activation, thus generating a hydroxysodalite coating layer as desilication was suppressed, and the amorphous phase was effectively removed. The mineralogical phase of the desilicated HAFA is mainly mullite and corundum, and the Al2O3/SiO2 mass ratio was elevated from 1.29 to 3.02. Mullite refractory obtained from the desilicated HAFA exhibited excellent physical properties. This study provides insights into further high-valued utilization of HAFA. (C) 2021 Elsevier B.V. All rights reserved.