Formability of Annealed Ni-Ti Shape Memory Alloy Sheet

被引：2

作者：

Fann, K. J. ^{[1
]}

Su, J. Y. ^{[1
]}

Chang, C. H. ^{[1
]}

机构：

[1] Natl Chung Hsing Univ, Dept Mech Engn, Taichung 40227, Taiwan

来源：

2017 5TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING | 2018年 / 324卷

关键词：

SUPERELASTICITY;

D O I：

10.1088/1757-899X/324/1/012038

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Ni-Ti shape memory alloy has two specific properties, superelasiticity and shape memory effect, and thus is widely applied in diverse industries. To extend its application, this study attempts to investigate the strength and cold formability of its sheet blank, which is annealed at various temperatures, by hardness test and by Erichsen-like cupping test. As a result, the higher the annealing temperature, the lower the hardness, the lower the maximum punch load as the sheet blank fractured, and the lower the Erichsen-like index or the lower the formability. In general, the Ni-Ti sheet after annealing has an Erichsen-like index between 8 mm and 9 mm. This study has also confirmed via DSC that the Ni-Ti shape memory alloy possesses the austenitic phase and shows the superelasticity at room temperature.

引用

页数：5

共 50 条

[31] Micromemory effects involved during martensitic transformation in Ni-rich Ni-Ti alloy
Mahesh, K. K.
dos Santos, C. M. L.
Fernandes, Francisco M. Braz
ADVANCED MATERIALS FORUM III, PTS 1 AND 2, 2006, 514-516 : 1668 - 1672
[32] Microstructure and superelastic properties of free forged Ti-Ni shape-memory alloy
Bahador, Abdollah
Hamzah, Esah
Kondoh, Katsuyoshi
Asma Abubakar, Tuty
Yusof, Farazila
Umeda, Junko
Saud, Safaa N.
Ibrahim, Mustafa K.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2018, 28 (03) : 502 - 514
[33] THE EFFECT OF NON-CONSTANT YOUNG'S MODULUS IN MODELLING OF TENSION AND COMPRESSION OF SUPERELASTIC NI-TI SHAPE MEMORY ALLOYS
Puksic, Andrej
Kunavar, Janez
Brojan, Miha
Kosel, Franc
JOURNAL OF MECHANICS, 2010, 26 (04) : 553 - 561
[34] Effect of Ti content on abnormal grain growth of Fe-Mn-Al-Ni-Ti shape memory alloy
Wang, Qinghao
Cui, Ye
Li, Xinghao
Wu, Pulin
Wang, Haosheng
Zhang, Zhongwu
SMART MATERIALS AND STRUCTURES, 2024, 33 (06)
[35] Influence of isothermal ageing on mechanical behaviour in Ni-rich Ti-Zr-Ni shape memory alloy
Sandu, A. M.
Tsuchiya, K.
Yamamoto, S.
Todaka, Y.
Umemoto, M.
SCRIPTA MATERIALIA, 2006, 55 (12) : 1079 - 1082
[36] Fatigue life of Ti-50 at.% Ni and Ti-40Ni-10Cu (at.%) shape memory alloy wires
Miyazaki, S
Mizukoshi, K
Ueki, T
Sakuma, T
Liu, YN
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 273 : 658 - 663
[37] Additive Manufacturing of Binary Ni-Ti Shape Memory Alloys Using Electron Beam Powder Bed Fusion: Functional Reversibility Through Minor Alloy Modification and Carbide Formation
Krooss, P.
Lauhoff, C.
Gustmann, T.
Gemming, T.
Sobrero, C.
Ewald, F.
Brenne, F.
Arold, T.
Nematolahi, M.
Elahinia, M.
Thielsch, J.
Hufenbach, J.
Niendorf, T.
SHAPE MEMORY AND SUPERELASTICITY, 2022, 8 (04) : 452 - 462
[38] Mechanical and Functional Properties of Ti48.6Ni49.6Co1.8 Shape Memory Alloy
Karelin, Roman D.
Andreev, Vladimir A.
Khmelevskaya, Irina Yu.
Prokoshkin, Sergey D.
Resnina, Natalia N.
Komarov, Victor S.
Bondareva, Sofya A.
Yusupov, Vladimir S.
SHAPE MEMORY ALLOYS, SMA 2018, 2018, 9 : 19 - 23
[39] Tribology behaviors of Ti-Ni51 .5 at% shape memory alloy with different microstructures and textures
Yang, Rui
Li, Song
Zhang, Nan
Wang, Chao
Wang, Ting-Mei
Wang, Qi-Hua
RARE METALS, 2021, 40 (12) : 3616 - 3626
[40] Texture Formation in a Polycrystalline Fe-Ni-Co-Al-Ti-B Shape Memory Alloy
Lee, Doyup
Omori, Toshihiro
Han, Kwangsik
Hayakawa, Yasuyuki
Kainuma, Ryosuke
ISIJ INTERNATIONAL, 2020, 60 (12) : 2973 - 2982

← 1 2 3 4 5 →