Surface characterization and growth mechanism of laminated Ti3SiC2 crystals fabricated by hot isostatic pressing

被引：33

作者：

Wu, Qiong ^{[1
]}

Li, Changsheng ^{[1
]}

Tang, Hua ^{[1
]}

机构：

[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Jiangsu, Peoples R China

来源：

APPLIED SURFACE SCIENCE | 2010年 / 256卷 / 23期

关键词：

Ti3SiC2; Hot isostatic pressing; Growth mechanism; DEFORMATION; TEMPERATURE; MORPHOLOGY; CARBIDE;

D O I：

10.1016/j.apsusc.2010.05.012

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Laminated Ti3SiC2 crystals were prepared by hot isostatic pressing from Ti, Si, C and Al powders with NaCl additive in argon at 1350 degrees C. The morphology and microstructure of Ti3SiC2 crystals were investigated by means of XRD, SEM, and TEM. The high symmetry and crystalline was revealed by high resolution transmission electronic microscope (HRTEM) and selected area electron diffraction (SAED). The growth mechanism of Ti3SiC2 crystals controlled by two-dimensional nucleation was put forward. The growth pattern of layered steps implies that the growth of the (002) face should undergo two steps, the intermittent two-dimensional nucleation and the continuous lateral spreading of layers on growth faces. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：6986 / 6990

页数：5

共 50 条

[41] Characterization of Thermomechanical Behavior of Ti3SiC2 and Ti2AlC Ceramics Elaborated by Spark Plasma Sintering Using Ultrasonic Means
Kozak, Karolina
Dosi, Ariane
Antou, Guy
Pradeilles, Nicolas
Chotard, Thierry
ADVANCED ENGINEERING MATERIALS, 2016, 18 (11) : 1952 - 1957
[42] Fabrication and microstructure characterization of W-La2O3-Y2O3 composites by spark plasma sintering and hot isostatic pressing
Lee, Eui Seon
Heo, Youn Ji
Kim, Ji Young
Choi, Wonjune
Byun, Jongmin
Oh, Sung -Tag
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2024, 119
[43] Synthesis of Ti 3SiC 2 ceramics by reactive sintering and its growth mechanism
Yang, Feng
Li, Changsheng
Tang, Hua
Zhu, Bingying
Gao, Qingxia
Liu, Jinyinzi
Hu, Zhili
Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2012, 32 (09): : 825 - 829
[44] Synthesis and reaction mechanism of Ti3SiC2 ternary compound by carbothermal reduction of TiO2 and SiO2 powder mixtures
Cetinkaya, Senol
Eroglu, Serafettin
CERAMICS INTERNATIONAL, 2012, 38 (08) : 6445 - 6453
[45] PREPARATION AND CHARACTERIZATION OF TiO2-Ta2O5-CaCO3 VARISTOR CERAMICS BY HOT ISOSTATIC PRESSING (HIP) AND POST-ANNEALING
Kang, Kunyong
Zhu, Gang
Chai, Xijuan
Deng, Shuduan
Xu, Kaimeng
CERAMICS-SILIKATY, 2021, 65 (01) : 1 - 8
[46] Effect of thermo-hydrogen-treatment on the surface oxide film and the compaction temperature of Ti-47Al-2Cr-2Nb pre-alloyed powders during hot-isostatic-pressing
Li, Jizhan
Song, Bo
Zhang, Lei
Wen, Shifeng
Wei, Qingsong
Chen, Hongxia
Shi, Yusheng
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2019, 44 (18) : 9378 - 9385
[47] Wear-triggered self-healing behavior on the surface of nanocrystalline nickel aluminum bronze/Ti3SiC2 composites
Zhai, Wenzheng
Lu, Wenlong
Zhang, Po
Wang, Jian
Liu, Xiaojun
Zhou, Liping
APPLIED SURFACE SCIENCE, 2018, 436 : 1038 - 1049
[48] Ambient dry sliding friction and wear behaviour of laser surface textured (LST) Ti3SiC2 MAX phase composite against hardened steel and alumina
Magnus, Carl
Gulenc, Idris T.
Rainforth, W. M.
WEAR, 2022, 490-491
[49] Preceramic paper-derived SiCf/Ti3Al(Si)C2 and SiCf/Ti3SiC2 MAX-phase based laminates fabricated using spark plasma sintering
Kashkarov, E. B.
Pushilina, N. S.
Syrtanov, M. S.
Krotkevich, D. G.
Gotman, I
Travitzky, N.
SCRIPTA MATERIALIA, 2021, 194
[50] Effect of aluminum addition on the densification behavior and mechanical properties of synthesized high-purity nano-laminated Ti3SiC2 through spark plasma sintering
Pourebrahim, Alireza
Baharvandi, Hamidreza
Foratirad, Hamze
Ehsani, Naser
JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 730 : 408 - 416

← 1 2 3 4 5 →