Surface characterization and growth mechanism of laminated Ti3SiC2 crystals fabricated by hot isostatic pressing

被引：33

作者：

Wu, Qiong ^{[1
]}

Li, Changsheng ^{[1
]}

Tang, Hua ^{[1
]}

机构：

[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Jiangsu, Peoples R China

来源：

APPLIED SURFACE SCIENCE | 2010年 / 256卷 / 23期

关键词：

Ti3SiC2; Hot isostatic pressing; Growth mechanism; DEFORMATION; TEMPERATURE; MORPHOLOGY; CARBIDE;

D O I：

10.1016/j.apsusc.2010.05.012

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Laminated Ti3SiC2 crystals were prepared by hot isostatic pressing from Ti, Si, C and Al powders with NaCl additive in argon at 1350 degrees C. The morphology and microstructure of Ti3SiC2 crystals were investigated by means of XRD, SEM, and TEM. The high symmetry and crystalline was revealed by high resolution transmission electronic microscope (HRTEM) and selected area electron diffraction (SAED). The growth mechanism of Ti3SiC2 crystals controlled by two-dimensional nucleation was put forward. The growth pattern of layered steps implies that the growth of the (002) face should undergo two steps, the intermittent two-dimensional nucleation and the continuous lateral spreading of layers on growth faces. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：6986 / 6990

页数：5

共 50 条

[31] Superior uniform deformation ability of intragranular nano TiB reinforced Ti-6.5Al-2Zr-Mo-V fabricated by hot isostatic pressing
Jin, Jiayi
Wang, Shuai
Lu, Weihang
Huang, Lujun
Gong, Delong
Meng, Fanchao
Liu, Wenqi
Chen, Xin
Geng, Lin
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 912
[32] Study of Reaction Mechanism for Synthesis of Ti3SiC2 by Mechanically Induced Self-Propagation Reaction
Liang Baoyan
Han Xin
Wang Mingzhi
RARE METAL MATERIALS AND ENGINEERING, 2009, 38 (10) : 1727 - 1730
[33] Al alloy/Ti3SiC2 composites fabricated by pressureless infiltration with melt-spun Al alloy ribbons
Zhou, Chaolan
Wu, Xiaoyu
Ngai, Tungwai L.
Li, Liejun
Ngai, Sieglind
Chen, Zimo
CERAMICS INTERNATIONAL, 2018, 44 (06) : 6026 - 6032
[34] Synthesis, microstructure, and mechanical properties of TiC-SiC-Ti3SiC2composites prepared by in situ reactive hot pressing
Liao, Nan
Xu, Ludi
Jin, Yuxi
Xiao, Youtao
Grasso, Salvatore
Hu, Chunfeng
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2020, 17 (04) : 1601 - 1607
[35] Evolution of binary phase TiC/Ti3SiC2 composites from TiC/Ti/Si by hot-pressed reactive sintering
Lo, Wen-Tse
Nayak, Pramoda K.
Lu, Horng-Hwa
Lii, Ding-Fwu
Huang, Jow-Lay
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2010, 172 (01): : 18 - 23
[36] Microstructural evolution and growth kinetics of interfacial compounds in TiAl/Ti3SiC2 diffusion bonding joints
Wang, Qi
Chen, Guo-qing
Wang, Kang
Fu, Xue-song
Zhou, Wen-long
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 756 : 149 - 155
[37] Microstructure and mechanical properties of in-situ hot pressed (TiB2 + SiC)/Ti3SiC2 composites with tunable TiB2 content
Zou, Wenjie
Li, Fangzhi
Zhang, Haibin
Yang, Jian
Peng, Shuming
Qiu, Tai
ADVANCES IN APPLIED CERAMICS, 2016, 115 (05) : 282 - 287
[38] Microstructure evolution and a new mechanism of B2 phase on room temperature mechanical properties of Ti-47Al-2Cr-2Nb alloy prepared by hot isostatic pressing
Li, Jizhan
Song, Bo
Nurly, Hasfi
Xue, PengJu
Wen, Shifeng
Wei, Qingsong
Shi, Yusheng
MATERIALS CHARACTERIZATION, 2018, 140 : 64 - 71
[39] Micro-mechanism and mechanical properties of solid-powder hot isostatic pressing diffusion-bonded Ti2AlNb alloy
Zhu, Langping
Pan, Yu
Liu, Yanjun
Wang, Xiangning
Mo, Xiaofei
Sun, Zhiyu
Nan, Hai
Qu, Xuanhui
Lu, Xin
ADVANCED POWDER TECHNOLOGY, 2021, 32 (10) : 3610 - 3623
[40] Ultra-high quality factor of transparent Al2O3 ceramics fabricated by vacuum sintering and post hot isostatic pressing
Yin, Jun
Li, Xiao
Lai, Yuanming
Zhang, Xi
Yu, Shengquan
Luo, Yongzhi
CERAMICS INTERNATIONAL, 2023, 49 (22) : 36879 - 36884

← 1 2 3 4 5 →