Measurements of particle velocity and concentration for dilute swirling gas-solid flow in a vertical pipe

被引:12
|
作者
Li, H
Tomita, Y
机构
[1] Kagoshima Univ, Dept Mech Engn, Kagoshima 8900065, Japan
[2] Kyushu Inst Technol, Dept Mech Engn, Kitakyushu, Fukuoka 804, Japan
关键词
gas-solid two-phase flow; particle concentration; particle velocity; pipeline; swirling flow;
D O I
10.1080/02726350215333
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Experimental studies concerning the characterization of a dilute swirling gas-solid flow were carried out in a vertical pipe with a height of 12 m and an inner diameter of 80 nun. Polyethylene pellets, with mean diameter of 3.2 mm, were used as test particles. The initial swirl number varied from 0.0 to 0.94, the mean gas velocity varied from 9 to 25 m/s, and the solid-gas ratio varied from 0.2 to 0.7. In this study, the particle velocity and concentration profiles were measured by the photographic image technique for both nonswirling (axial) and swirling gas-solid flows. It was found that the particle velocity of the swirling flow is lower than that of the axial flow in the range of high gas velocity; however, high particle velocity in the former flow can be obtained in the range of low gas velocity. The particle velocity profiles, on the other hand, were found to be nearly uniform in both the swirling and axial flows. The particle concentration profiles in the swirling flow exhibited symmetric distributions with respect to the pipe axis, and a higher particle concentration appeared in the vicinity of the wall located in the acceleration region.
引用
收藏
页码:1 / 13
页数:13
相关论文
共 50 条
  • [21] Investigation on Measurement of Size and Concentration of Solid Phase Particles in Gas-Solid Two Phase Flow
    Wang Yueming
    Lyu Xiaoqi
    Li Wentao
    Yao Guodong
    Bai Junyuan
    Bao An
    CHINESE JOURNAL OF ELECTRONICS, 2018, 27 (02) : 381 - 385
  • [22] Investigation on Measurement of Size and Concentration of Solid Phase Particles in Gas-Solid Two Phase Flow
    WANG Yueming
    LYU Xiaoqi
    LI Wentao
    YAO Guodong
    BAI Junyuan
    BAO An
    Chinese Journal of Electronics, 2018, 27 (02) : 381 - 385
  • [23] Ultrasonic Radial Simulation Research of Solid Particle Distribution of Segregation Flow in Gas-solid Two Phase Flow
    Wang, Yueming
    Yao, Guodong
    Zhang, Yaoyao
    Liu, Meng
    Ge, Pengcheng
    PROCEEDINGS OF THE 2017 2ND INTERNATIONAL CONFERENCE ON AUTOMATION, MECHANICAL AND ELECTRICAL ENGINEERING (AMEE 2017), 2017, 87 : 61 - 64
  • [24] Conditions of gas-solid two-phase flow formed in a vertical screw conveyor
    Sun Xiaoxia
    Meng Wenjun
    Yuan Yuan
    ADVANCES IN MECHANICAL ENGINEERING, 2018, 10 (09):
  • [25] Shock wave of gas-solid flow considering the two-phase sound velocity
    Zhao, Liangju
    Gao, Lijuan
    Chen, Qinghua
    Gao, Hong
    Zeng, Danling
    Manufacturing Engineering and Materials Handling, 2005 Pts A and B, 2005, 16 : 1309 - 1313
  • [26] Study on the Dynamic Properties of Gas-Solid Two-Phase Flow for Tee Branch Pipe
    Wang, Xiaoning
    Xu, Shaohui
    Cao, Junfeng
    Hu, Shougen
    2010 THE SECOND CHINA ENERGY SCIENTIST FORUM, VOL 1-3, 2010, : 1318 - +
  • [27] Velocity measurements and turbulence statistics of a confined isothermal swirling flow
    Ahmed, SA
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1998, 17 (03) : 256 - 264
  • [28] Investigation of transient gas-solid flow characteristics and particle erosion in a square gate valve
    Ma, Guangfei
    Lin, Zhe
    Zhu, Zuchao
    ENGINEERING FAILURE ANALYSIS, 2020, 118
  • [29] A light extinction-based concentration measurement in two phase gas-solid flow
    Hajieghrary, Omid
    Stoeber, Boris
    Green, Sheldon
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2023, 164
  • [30] Ultrasonic Simulation Research of Solid Particle Radial Position Distribution in Gas-solid Two Phase Flow
    Wang, Yueming
    Yao, Guodong
    Jia, Hua
    Zhang, Yaoyao
    Liu, Meng
    Ge, Pengcheng
    Yao, Guodong
    PROCEEDINGS OF THE 2017 INTERNATIONAL CONFERENCE ON INFORMATION TECHNOLOGY AND INTELLIGENT MANUFACTURING (ITIM 2017), 2017, 142 : 133 - 136