Properties of Hard Ni-P-Al2O3 and Ni-P-SiC Coatings on Al-Based Casting Alloys

被引：22
|
作者：
Vojtech, D. [1 ]
机构：
[1] Inst Chem Technol, Dept Met & Corros Engn, CR-16628 Prague, Czech Republic
来源：
MATERIALS AND MANUFACTURING PROCESSES | 2009年 / 24卷 / 7-8期
关键词：
Abrasion resistance; Al-Si alloy; Aluminium; Aluminium oxide; Casting; Ceramics; Electroless coating; Hardness; Heat treatment; Nanocrystalline phase; Nickel; Phosphorus; Precipitation; Silicon carbide; X-ray diffraction; COMPOSITE COATINGS; NANOCRYSTALLINE MATERIALS; ELECTROLESS; MICROSTRUCTURE; RESISTANCE; DEPOSITS; FRICTION; BEHAVIOR;
D O I：
10.1080/10426910902809784
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present work, electroless Ni-P-Al2O3 and Ni-P-SiC composite coatings on an aluminium-silicon casting alloy are studied. A suspension containing nickel lactate, nickel hypophosphite, lactic acid, water, and dispersed ceramic particles was used for the electroless deposition. The structural study, hardness, and abrasion tests reveal that properties of the coatings strongly depend on the composition of deposition bath and on the heat treatment. The composite coatings heat treated at 400 degrees C/1h showing outstanding abrasion resistance are promising candidates for surface protection of light components.
引用
收藏
页码：754 / 757
页数：4
相关论文
共 50 条
  • [31] ELECTRODEPOSITED NI-P-SIC COMPOSITE COATINGS
    BERKH, O
    BODNEVAS, A
    ZAHAVI, J
    PLATING AND SURFACE FINISHING, 1995, 82 (11): : 62 - 66
  • [32] Effect of Annealing Temperature and Alumina Particles on Mechanical and Tribological Properties of Ni-P-Al2O3 Composite Coatings
    Prasanna Gadhari
    Prasanta Sahoo
    Silicon, 2017, 9 : 761 - 774
  • [33] Corrosion and Oxidation Resistance of Electroless Ni-P-Al2O3 Composite Coatings on Carbon Steel
    Sun, Wan-chang
    Tan, Ming-feng
    Lu, Jian-hua
    Zhang, Lei
    Zhou, Quan
    MECHANICAL ENGINEERING AND GREEN MANUFACTURING, PTS 1 AND 2, 2010, : 831 - +
  • [34] Annealing temperature effect on the corrosion parameters of autocatalytically produced Ni-P and Ni-P-Al2O3 coatings in artificial seawater
    Leon, C.
    Garcia-Ochoa, E.
    Garcia-Guerra, J.
    Gonzalez-Sanchez, J.
    SURFACE & COATINGS TECHNOLOGY, 2010, 205 (07): : 2425 - 2431
  • [35] Effect of Annealing Temperature and Alumina Particles on Mechanical and Tribological Properties of Ni-P-Al2O3 Composite Coatings
    Gadhari, Prasanna
    Sahoo, Prasanta
    SILICON, 2017, 9 (05) : 761 - 774
  • [36] Tribological characterization of heat-treated Ni-P and Ni-P-Al2O3 composite coatings by reciprocating sliding tests
    Leon-Patino, C. A.
    Garcia-Guerra, J.
    Aguilar-Reyes, E. A.
    WEAR, 2019, 426 : 330 - 340
  • [37] Effect of alumina content on wear behaviour of Ni-P-Al2O3(α) electroless composite coatings
    Alirezaei, S
    Monirvaghefi, SM
    Salehi, M
    Saatchi, A
    Kargosha, M
    SURFACE ENGINEERING, 2005, 21 (01) : 60 - 66
  • [38] 化学镀Ni-P-Al2O3工艺优化
    曾宪光
    陈红辉
    黄小兵
    李明田
    附青山
    鲁越
    电镀与环保, 2015, 35 (02) : 14 - 16
  • [39] Effect of plating parameters on Ni-P-Al2O3 coatings deposited by ultrasonic electroless deposition
    Liang, Gui-Qiang
    Zhou, Xiao-Qin
    Gongneng Cailiao/Journal of Functional Materials, 2014, 45 (11): : 11137 - 11139
  • [40] Ni-P-Al2O3化学复合镀的机理
    王国斌
    东北工学院学报, 1991, (05) : 548 - 552
12345