Cyclic response of copper single crystal micro-beams

被引：93

作者：

Kiener, D. ^{[1
]}

Motz, C. ^{[1
]}

Grosinger, W. ^{[1
]}

Weygand, D. ^{[2
]}

Pippan, R. ^{[1
]}

机构：

[1] Austrian Acad Sci, Erich Schmid Inst Mat Sci, A-8700 Leoben, Austria

[2] Univ Karlsruhe TH, IZBS, D-76131 Karlsruhe, Germany

来源：

SCRIPTA MATERIALIA | 2010年 / 63卷 / 05期

关键词：

Low cycle fatigue (LCF); Micro-bending; Single crystal copper; Three-dimensional discrete dislocation simulation (3D-DDD); MECHANICAL-PROPERTIES; BEHAVIOR; INDENTATION; PLASTICITY; HARDNESS;

D O I：

10.1016/j.scriptamat.2010.05.014

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A new technique to perform in situ miniaturized bending fatigue experiments was applied to single crystal copper beams. Pronounced monotonic hardening and an increasing Bauschinger effect were observed with increasing normalized displacement Remarkably, no cyclic hardening or softening was observed Three-dimensional discrete dislocation dynamics simulations support these results and point out the importance of dislocation pile-ups and local hardening mechanisms. These lead to local strain redistribution and the activation of new glide planes as observed experimentally (C) 2010 Acta Materialia Inc Published by Elsevier Ltd All rights reserved

引用

页码：500 / 503

页数：4

共 50 条

[41] Revisiting dislocation reactions and their role in uniaxial deformation of copper single crystal micro-pillars
Mishra, Ashish
Alankar, Alankar
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2019, 27 (05)
[42] Thermo-Mechanical Vibration Analysis of Size-Dependent Functionally Graded Micro-Beams with General Boundary Conditions
Su, Zhu
Jin, Guoyong
Wang, Lifeng
Wang, Dan
INTERNATIONAL JOURNAL OF APPLIED MECHANICS, 2018, 10 (08)
[43] Crack velocity measurements through continuous stiffness monitoring of cyclically loaded notched micro-beams of thin graded Pt-Ni-Al bond coats
Venkatraman, Kaustubh
Jayaram, Vikram
INTERNATIONAL JOURNAL OF FRACTURE, 2021, 227 (01) : 15 - 37
[44] Cyclic Response of Concrete Beams Reinforced by Plain Bars
Marefat, Mohammad S.
Shirazi, Seyed Masood Hassanzadeh
Rostamshirazi, Rasool
Khanmohammadi, Mohammad
JOURNAL OF EARTHQUAKE ENGINEERING, 2009, 13 (04) : 463 - 481
[45] Nanoscale Origins of the Size Effect in the Compression Response of Single Crystal Ni-Base Superalloy Micro-Pillars
Ying, Siqi
Ma, Lifeng
Sui, Tan
Papadaki, Chrysanthi
Salvati, Enrico
Brandt, Leon Romano
Zhang, Hongjia
Korsunsky, Alexander M.
MATERIALS, 2018, 11 (04):
[46] Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams
Gong, Jicheng
Wilkinson, Angus J.
ACTA MATERIALIA, 2009, 57 (19) : 5693 - 5705
[47] Design of an integral super twisting sliding mode controller for position control and extending the traveling range of initially curved micro-beams
Salehi Kolahi, Mohammad Reza
Moeinkhah, Hossein
Rahmani, Hossein
JOURNAL OF VIBRATION AND CONTROL, 2023, 29 (1-2) : 65 - 78
[48] On the cyclic response of ultrafine-grained copper
Vinogradov, A
Kaneko, Y
Kitagawa, K
Hashimoto, S
Valiev, R
MECHANICALLY ALLOYED, METASTABLE AND NANOCRYSTALLINE MATERIALS, PART 2, 1998, 269-2 : 987 - 992
[49] Pull-in instability and free vibration of electrically actuated poly-SiGe graded micro-beams with a curved ground electrode
Jia, X. L.
Yang, J.
Kitipornchai, S.
Lim, C. W.
APPLIED MATHEMATICAL MODELLING, 2012, 36 (05) : 1875 - 1884
[50] Adaptive boundary control of the size-dependent behavior of Euler-Bernoulli micro-beams with unknown parameters and varying disturbance
Nojoumian, Mohammad Ali
Vatankhah, Ramin
Salarieh, Hassan
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2017, 231 (10) : 1777 - 1790

← 1 2 3 4 5 →