Quality Meter of Electric Power Systems based on IEEE Standard 1459-2000

被引：7
作者：
Milanes, M. I. [1 ]
Minambres, V. [1 ]
Romero, E. [1 ]
Barrero, F. [1 ]
机构：
[1] Univ Extremadura, Sch Ind Engn, Badajoz, Spain
来源：
CPE: 2009 COMPATIBILITY AND POWER ELECTRONICS | 2009年
关键词：
Harmonic distortion; power measurements; power quality; rapid prototyping; real time systems; IMPLEMENTATION;
D O I：
10.1109/CPE.2009.5156018
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper proposes a new method with a new platform for the measurement of the electric power quantities defined in the IEEE Standard 1459-2000 for single-phase, three-phase three-wire and three-phase four-wire power systems. The method consists on the implementation of a SIMULINK algorithm based on the real time domain, which obtains the fundamental positive sequence magnitudes to solve the problem. The platform selected was an embedded PC (Target) that runs the code in the MATLAB xPCTarget environments with a PCI data acquisition card, which takes the samples of the current and voltage sensors. It can be controlled and monitored by any other PC (Host) via TCP/IP with a COM application installed, specifically created with VISUAL BASIC. The hardware and software unity creates a power quality analyzer called QUAME (QUAlity MEter). Experimental tests and results in a low voltage distribution grid are included to test the platform performance.
引用
收藏
页码：86 / 92
页数：7
相关论文
共 13 条
[1]   TRENDS IN ACTIVE POWER-LINE CONDITIONERS [J].
AKAGI, H .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 1994, 9 (03) :263-268
[2]   Practical definitions for powers in systems with nonsinusoidal waveforms and unbalanced loads: A discussion [J].
Arseneau, R ;
Baghzouz, Y ;
Belanger, J ;
Bowes, K ;
Braun, A ;
Chiaravallo, A ;
Cox, M ;
Crampton, S ;
Emanuel, A ;
Filipski, P ;
Gunther, E ;
Girgis, A ;
Hartmann, D ;
He, SD ;
Hensley, G ;
Iwanusiw, D ;
Kortebein, W ;
McComb, T ;
McEachern, A ;
Nelson, T ;
Oldham, N ;
Piehl, D ;
Srinivasan, K ;
Stevens, R ;
Unruh, T ;
Williams, D .
IEEE TRANSACTIONS ON POWER DELIVERY, 1996, 11 (01) :79-101
[3]  
BHATTACHARYA S, 1995, 13 IAS ANN M OCT, V3, P2531
[4]  
CATALIOTTI A, 2000, P 21 IEEE INSTR MEAS, P1388
[5]   Clarke's alpha, beta, and zero components: A possible approach for the conceptual design of instrumentation compatible with IEEE Std. 1459-2000 [J].
Eigeles Emanuel, Alexander ;
Milanez, Dalgerti Lelis .
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2006, 55 (06) :2088-2095
[6]   Summary of IEEE standard 1459: Definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions [J].
Emanuel, AE .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2004, 40 (03) :869-876
[7]   DSP implementation of power measurements according to the IEEE trial-use standard 1459 [J].
Gherasim, C ;
Van den Keybus, J ;
Driesen, J ;
Belmans, R .
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2004, 53 (04) :1086-1092
[8]  
IEEE Std 1459-2000, 2000, 14592000 IEEE
[9]  
*MATLAB, MATLAB HELP XPC TARG
[10]   Novel method for synchronization to disturbed three-phase and single-phase systems [J].
Milanes-Montero, M. L. ;
Romero-Cadaval, E. ;
de Marcos, A. Rico ;
Minambres-Marcos, V. M. ;
Barrero-Gonzalez, F. .
2007 IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, PROCEEDINGS, VOLS 1-8, 2007, :860-865
12