Development of an ANN-Based Lumped Plasticity Model of RC Columns Using Historical Pseudo-Static Cyclic Test Data

Featured Application Predicting the critical properties of RC columns using the developed ANN model, providing parameters for their numerical simulation based upon a lumped plasticity model. Abstract This study explores the possibility of using an ANN-based model for the rapid numerical simulation and seismic performance prediction of reinforced concrete (RC) columns. The artificial neural network (ANN) method is implemented to model the relationship between the input features of RC columns and the critical parameters of the commonly used lumped plasticity (LP) model: The strength and the yielding, capping and ultimate deformation capacity. Cyclic test data of 1163 column specimens obtained from the PEER and NEEShub database and other sources are collected and divided into the training set, test set and validation set for the ANN model. The effectiveness of the proposed ANN model is validated by comparing it with existing explicit formulas and experimental results. Results indicated that the developed model can effectively predict the strength and deformation capacities of RC columns. Furthermore, the response of two RC frame structures under static force and strong ground motion were simulated by the ANN-based, bi-linear and tri-linear LP model method. The good agreement between the proposed model and test results validated that the ANN-based method can provide sufficiently accurate model parameters for modeling the seismic response of RC columns using the LP model.