A review of current research on disassembly sequence generation and computer aided design for disassembly

被引：29

作者：

Dong, J ^{[1
]}

Arndt, G ^{[1
]}

机构：

[1] Univ Wollongong, Fac Engn, Discipline Mfg Engn, Wollongong, NSW 2522, Australia

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | 2003年 / 217卷 / 03期

关键词：

disassembly; disassemblability; disassembly sequence generation; computer aided modelling;

D O I：

10.1243/095440503321590479

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

For many reasons, environmental consciousness is increasingly becoming a major concern for manufacturers. It is widely acknowledged that the most ecological way to treat worn-out products is by recycling, for which disassembly is critically important. This paper presents a review of recent research on the development of disassembly, focussing on disassemblability, disassembly sequence generation and computer aided design for disassembly. A total of 84 papers are surveyed, and conclusions are drawn as to further directions for research.

引用

页码：299 / 312

页数：14

共 84 条

[1] CAD SYSTEM WITH PRODUCT ASSEMBLY DISASSEMBLY PLANNING FUNCTION [J].

ARAI, E ;

IWATA, K .

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 1993, 10 (1-2) :41-48

[2]

Bing-Ran Zuo, 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065), P3681, DOI 10.1109/ROBOT.2000.845305

[3] Disassembly modeling: Two applications to a Philips 21'' television set [J].

Boks, CB ;

Brouwers, WCJ ;

Kroll, E ;

Stevels, ALN .

PROCEEDINGS OF THE 1996 IEEE INTERNATIONAL SYMPOSIUM ON ELECTRONICS AND THE ENVIRONMENT, CONFERENCE RECORD, 1996, :224-229

[4]

CSELENYI J, 1998, P IFAC INT FED AUT C, P65

[5]

CSER L, 1998, P IFAC INT FED AUT C, P59

[6] A CORRECT AND COMPLETE ALGORITHM FOR THE GENERATION OF MECHANICAL ASSEMBLY SEQUENCES [J].

DEMELLO, LSH ;

SANDERSON, AC .

IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, 1991, 7 (02) :228-240

[7] Extended Petri-net modeling for re-manufacturing line simulation [J].

Erdos, G ;

Xirouchakis, P .

FIRST INTERNATIONAL SYMPOSIUM ON ENVIRONMENTALLY CONSCIOUS DEGIGN AND INVERSE MANUFACTURING, PROCEEDINGS, 1999, :83-88

[8]

Feldmann K, 1998, INTELLIGENT ASSEMBLY AND DISASSEMBLY (IAD'98), P1

[9] Computer-based product structure analysis for technical goods regarding optimal end-of-life strategies [J].

Feldmann, K ;

Trautner, S ;

Lohrmann, H ;

Melzer, K .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2001, 215 (05) :683-693

[10] Modeling and analysis of disassembly systems using continuous Petri nets [J].

Fernandez, R ;

Zerhouni, N .

PROCEEDINGS OF THE 2001 IEEE INTERNATIONAL SYMPOSIUM ON ASSEMBLY AND TASK PLANNING (ISATP2001): ASSEMBLY AND DISASSEMBLY IN THE TWENTY-FIRST CENTURY, 2001, :232-237

← 1 2 3 4 5 6 7 8 9 →