Efficient separation of copper and nickel from ammonium chloride solutions through the antagonistic effect of TRPO on Acorga M5640

被引：22

作者：

Yang, Ruisi ^{[1
]}

Wang, Shixiong ^{[1
]}

Duan, Hengpan ^{[1
]}

Yuan, Xiaohong ^{[1
]}

Huang, Zhangjie ^{[1
]}

Guo, Hong ^{[1
]}

Yang, Xiangjun ^{[1
]}

机构：

[1] Yunnan Univ, Sch Chem Sci & Technol, 2 CuiHu North Rd, Kunming 650091, Yunnan Province, Peoples R China

来源：

HYDROMETALLURGY | 2016年 / 163卷

基金：

中国国家自然科学基金;

关键词：

Copper/nickel separation; Acorga M5640; TRPO; Solvent extraction; Ammoniacal solution; EXTRACTION; RECOVERY;

D O I：

10.1016/j.hydromet.2016.03.006

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In this study, copper and nickel in ammoniacal/ammonium chloride solutions were separated by using an extractant mixture of Acorga M5640 and trialkylphosphine oxide (TRPO). The effects of contact time, Acorga M5640 concentration, modifier concentration, total ammonia concentration, and phase ratio on the extraction and separation of both metals were determined. The addition of TRPO into Acorga M5640 organic phase exerted antagonistic effects on copper and nickel extractions. The antagonistic effect of the extractant mixture was significantly stronger on the extraction of nickel than on that of copper. More than 99.96% of copper and less than 6.6% of nickel were extracted using a mixture of 10 vol.% Acorga M5640 and 2 vol.% TRPO in kerosene from an ammoniacal solution initially containing 3.0 g/L each of copper and nickel under optimal extraction conditions. The separation factor of copper over nickel reached 35,250. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：18 / 23

页数：6

共 18 条

[1] Extraction of nickel from ammoniacal ammonium carbonate solutions using Acorga M5640 in Iberfluid [J].