Surface morphology, thermomechanical and barrier properties of poly(ether sulfone)-toughened epoxy clay ternary nanocomposites

被引：28

作者：

Asif, Abdul Azeez ^{[1
]}

John, Bibin ^{[1
]}

Rao, Vattikuty Lakshmana ^{[1
]}

Ninan, Kovoor Ninan ^{[1
]}

机构：

[1] Vikram Sarabhai Space Ctr, Adhes & Adv Matrix Resin Sect, Propellants & Special Chem Grp, Trivandrum 695022, Kerala, India

来源：

POLYMER INTERNATIONAL | 2010年 / 59卷 / 07期

关键词：

fracture toughness; gas permeability; organoclay; rheology; MECHANICAL-PROPERTIES; ETHER KETONE); SILICATE NANOCOMPOSITES; POLYMER; RESIN; BEHAVIOR;

D O I：

10.1002/pi.2817

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

Poly(ether sulfone) (PES)-toughened epoxy clay ternary nanocomposites were prepared by melt blending of PES with diglycidyl ether of bisphenol A epoxy resin along with Cloisite 30B followed by curing with 4,4'-diaminodiphenylsulfone. The effect of organoclay and thermoplastic on the fracture toughness, permeability, viscoelasticity and thermomechanical properties of the epoxy system was investigated. A significant improvement in fracture toughness and modulus with reduced coefficient of thermal expansion (CTE) and gas permeability were observed with the addition of thermoplastic and clay to the epoxy system. Scanning electron microscopy of fracture-failed specimens revealed crack path deflection and ductile fracture without phase separation. Oxygen gas permeability was reduced by 57% and fracture toughness was increased by 66% with the incorporation of 5 phr clay and 5 phr thermoplastic into the epoxy system. Optical transparency was retained even with high clay content. The addition of thermoplastic and organoclay to the epoxy system had a synergic effect on fracture toughness, modulus, CTE and barrier properties. Planetary ball-milled samples gave exfoliated morphology with better thermomechanical properties compared to ultrasonicated samples with intercalated morphology. (C) 2010 Society of Chemical Industry

引用

页码：986 / 997

页数：12

共 51 条

[11] Study of the interlayer expansion mechanism and thermal-mechanical properties of surface-initiated epoxy nanocomposites [J].

Chen, JS ;

Poliks, MD ;

Ober, CK ;

Zhang, YM ;

Wiesner, U ;

Giannelis, E .

POLYMER, 2002, 43 (18) :4895-4904

[12] Chemorheology and properties of epoxy/layered silicate nanocomposites [J].

Dean, D ;

Walker, R ;

Theodore, M ;

Hampton, E ;

Nyairo, E .

POLYMER, 2005, 46 (09) :3014-3021

[13] New high-performance thermoplastic toughened epoxy thermosets [J].

DiPasquale, G ;

Motta, O ;

Recca, A ;

Carter, JT ;

McGrail, PT ;

Acierno, D .

POLYMER, 1997, 38 (17) :4345-4348

[14]

Espuche E, 1999, J POLYM SCI POL PHYS, V37, P473, DOI 10.1002/(SICI)1099-0488(19990301)37:5<473::AID-POLB8>3.0.CO

[15]

2-R

[16] Synthesis of hydroxyl-terminated poly(ether ether ketone) with pendent tert-butyl groups and its use as a toughener for epoxy resins [J].

Francis, B ;

Thomas, S ;

Asari, GV ;

Ramaswamy, R ;

Jose, S ;

Rao, VL .

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2006, 44 (03) :541-556

[17] Hydroxyl terminated poly(ether ether ketone) with pendent methyl group toughened epoxy resin: miscibility, morphology and mechanical properties [J].

Francis, B ;

Thomas, S ;

Jose, J ;

Ramaswamy, R ;

Rao, VL .

POLYMER, 2005, 46 (26) :12372-12385

[18] Toughened epoxy hybrid nanocomposites containing both an organophilic layered silicate filler and a compatibilized liquid rubber [J].

Fröhlich, J ;

Thomann, R ;

Mülhaupt, R .

MACROMOLECULES, 2003, 36 (19) :7205-7211

[19] Chernorheology of cyanate ester - organically layered silicate nanocomposites [J].

Ganguli, S ;

Dean, D ;

Jordan, K ;

Price, G ;

Vaia, R .

POLYMER, 2003, 44 (22) :6901-6911

[20]

*GC MARSH SPAC FLI, 2000, FIN REP X 33 LIQ HYD

← 1 2 3 4 5 6 →