Properties of amorphous tin-doped indium oxide thin films deposited by O2/Ar mixture ion beam-assisted system at room temperature

被引：24

作者：

Kim, HJ ^{[1
]}

Bae, JW ^{[1
]}

Kim, JS ^{[1
]}

Kim, KS ^{[1
]}

Jang, YC ^{[1
]}

Yeom, GY ^{[1
]}

Lee, NE ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Dept Mat Engn, Suwon 440746, Kyunggi Do, South Korea

来源：

SURFACE & COATINGS TECHNOLOGY | 2000年 / 131卷 / 1-3期

关键词：

tin-doped indium oxide; ion beam-assisted evaporation; ion-bombardment;

D O I：

10.1016/S0257-8972(00)00825-2

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Highly transparent and conductive thin films of tin-doped indium oxide (ITO) on glass substrates were grown by the ion beam-assisted deposition (IBAD) technique without any substrate heating. X-Ray diffraction investigations indicated that all films have an amorphous structure and no other crystalline phases. The addition of Ar to O-2 flow and the increased energy of incident ions were found to reduce the resistivity of the grown films. Observed decrease in the resistivity was attributed to the increase in the carrier concentration. In the optimal growth conditions at room temperature, we obtained the electrical resistivity of 4.6 x 10(-4) Ohm -cm, visible transmittance (at lambda = 550 nm) greater than or equal to 90%, and optical direct band gap energy of congruent to 3.75 eV. (C) 2000 Elsevier Science B.V. All rights reserved.

引用

页码：201 / 205

页数：5

共 14 条

[11] OHRING M, 1992, MAT SCI THIN FILMS, P235
[12] Electrical properties of ITO films prepared by tin ion implantation in In2O3 film
Sawada, M
Higuchi, M
[J]. THIN SOLID FILMS, 1998, 317 (1-2) : 157 - 160
[13] Deposition of indium tin oxide films on polycarbonate substrates by radio-frequency magnetron sputtering
Wu, WF
Chiou, BS
[J]. THIN SOLID FILMS, 1997, 298 (1-2) : 221 - 227
[14] PREPARATION OF INDIUM TIN OXIDE-FILMS AT ROOM-TEMPERATURE BY PULSED-LASER DEPOSITION
ZHENG, JP
KWOK, HS
[J]. THIN SOLID FILMS, 1993, 232 (01) : 99 - 104

← 1 2 →