A study of the effect of aluminum on MoSi2 formation by self-propagation high-temperature synthesis

被引：17
作者：
Hasani, S. [1 ]
Panjepour, M. [1 ]
Shamanian, M. [1 ]
机构：
[1] Isfahan Univ Technol, Dept Mat Engn, Esfahan 8415683111, Iran
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2010年 / 502卷 / 01期
关键词：
Combustion synthesis; MoSi2; formation; Self-propagation high-temperature synthesis; Aluminum; The oxidation of aluminum; IN-SITU SYNTHESIS; COMBUSTION SYNTHESIS; COMPOSITES; AL;
D O I：
10.1016/j.jallcom.2010.04.159
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
In this study, the self-propagation high-temperature synthesis (SHS) for the formation of MoSi2 in the presence of aluminum was investigated. Test specimens with nominal compositions including (Mo + 2Si) with stoichiometric ratio and (Mo + 2Si)+ 5 wt% Al were employed. Each of the different samples was tested for SHS to determine the thermal profile and differential thermal analysis (DTA) under air atmosphere. The registered thermal profiles resulted for the two samples showed the maximum temperature increase (about 400 degrees C) in the combustion front in the presence of aluminum. The DTA results also showed that the area of silicon melting point on the DTA curve was deleted in the presence of aluminum. On the other hand, the X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive spectrometer (EDS) studies indicated that the SHS reaction between Mo and Si was done in a more complete manner in the presence of aluminum and aluminum particles were all oxidized. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：80 / 86
页数：7
相关论文
共 50 条
[41]   Oxidation resistance of Cr-modified MoSi2 composites at high temperature [J].
Li, Niannian ;
Gao, Jun ;
Wang, Wanxia ;
Chen, Sheng-Chi ;
Wang, Kunlun ;
Wang, Yong ;
Wen, Chao-Kuang ;
Sun, Hui .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2024, 119
[42]   Effect of initial temperature on the plastic deformation of Al/Ni self-propagation welding by molecular dynamics study [J].
Li, Junchen ;
Bao, Yanfei ;
Ren, Junqiang ;
Wang, Yu ;
Lu, Xuefeng ;
Xue, Hongtao ;
Tang, Fuling .
MODERN PHYSICS LETTERS B, 2024, 38 (07)
[43]   Microstructure evolution and mechanical properties of Ni3Al/Al2O3 composite during self-propagation high-temperature synthesis and hot extrusion [J].
Sheng, L. Y. ;
Yang, F. ;
Xi, T. F. ;
Guo, J. T. ;
Ye, H. Q. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 555 :131-138
[44]   THE ALUMINUM SAPPHIRE INTERFACE FORMATION AT HIGH-TEMPERATURE - AN AES AND LEED STUDY [J].
VERMEERSCH, M ;
MALENGREAU, F ;
SPORKEN, R ;
CAUDANO, R .
SURFACE SCIENCE, 1995, 323 (1-2) :175-187
[45]   Effects of Al content on formation of Ta2AlC by self-propagating high-temperature synthesis [J].
Yeh, C. L. ;
Shen, Y. G. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 482 (1-2) :219-223
[46]   Synthesis of dense MoSi2 by high-frequency induction heated combustion and its mechanical properties [J].
Kim, HC ;
Park, CD ;
Jeong, JW ;
Shon, IJ .
METALS AND MATERIALS INTERNATIONAL, 2003, 9 (02) :173-178
[47]   Synthesis of dense MoSi2 by high-frequency induction heated combustion and its mechanical properties [J].
Hwan Cheol Kim ;
Choong Do Park ;
Jeong Wung Jeong ;
In Jin Shon .
Metals and Materials International, 2003, 9 :173-178
[48]   High temperature oxidation behavior of ZrB2-SiC added MoSi2 ceramics [J].
Tong, Zongwei ;
He, Rujie ;
Cheng, Tianbao ;
Zhang, Keqiang ;
Dai, Dawei ;
Yang, Yazheng ;
Fang, Daining .
CERAMICS INTERNATIONAL, 2018, 44 (17) :21076-21082
[49]   Effect of SIC and ZrO2 on Low Temperature Oxidation Resistance of MoSi2 Nanocomposites [J].
Liu, Changhong ;
Ai, Yunlong ;
Liang, Bingliang .
APPLIED MATERIALS AND TECHNOLOGIES FOR MODERN MANUFACTURING, PTS 1-4, 2013, 423-426 :11-+
[50]   Combustion and formation behavior of hybrid ZrB2 and ZrC particles in Al-Zr-B4C system during self-propagation high temperature synthesis [J].
Hu, Qiaodan ;
Luo, Peng ;
Zhang, Mengxian ;
Song, Mousheng ;
Li, Jianguo .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 31 :89-95
12345