Platform for monitoring the temperature of power LED junction by using the embedded protection diode

被引:0
作者
Vuza, Dan Tudor [1 ]
Vladescu, Marian [2 ]
机构
[1] Romanian Acad, Inst Math Simion Stoilow, Bucharest, Romania
[2] Univ Politehn Bucuresti, Optoelect Res Ctr, Bucharest, Romania
来源
2016 8TH INTERNATIONAL CONFERENCE ON ELECTRONICS, COMPUTERS AND ARTIFICIAL INTELLIGENCE (ECAI) | 2016年
关键词
power LED; junction temperature; thermal regime;
D O I
暂无
中图分类号
TP18 [人工智能理论];
学科分类号
081104 ; 0812 ; 0835 ; 1405 ;
摘要
The junction operating temperature of a power LED can be estimated by measuring with a thermocouple the temperature of the closest accessible metal part of the LED package, which is in most of the cases one of the electrical terminals, and making a calculation by taking into consideration the thermal resistances of the materials included in the LED structure. In the situations where the electrical terminals are not accessible, being placed right under the LED package, the thermocouple could be placed on the mounting PCB used heatsink, as close as possible to the thermal pad of the LED, but this may introduce errors, making the temperature estimation not accurate. The junction operating temperature can also be estimated by measuring the forward voltage of the LED, knowing the temperature coefficient of the forward voltage. In this paper the authors proposed an innovative method for measuring the operating temperature of power LEDs, using as temperature sensor the protection reverse diode embedded in the LED package.
引用
收藏
页数:5
相关论文
共 8 条
  • [1] Chhajeda S., 2005, P SPIE, V5739
  • [2] Farkas G, 2014, SOL ST LIGHT TECHNOL, P73, DOI 10.1007/978-1-4614-5091-7_4
  • [3] Han K., 2012, PRZ ELEKTROTECHNICZN, P180
  • [4] Jones M., 2012, ACCURATE TEMPERATURE
  • [5] OSRAM Opto Semiconductors, 2014, HIGH POW INFR EM 850
  • [6] Plotog I., 2015, P SOC PHOTO-OPT INS, V9258
  • [7] Vladescu M, 2014, INT SYM DES TECH ELE, P129, DOI 10.1109/SIITME.2014.6967009
  • [8] Xi Y., 2004, APPL PHISICS LETT, V85