Color repeatability in inkjet printing

被引：0

作者：

Yang, Yiqi ^{[1
]}

Naarani, Vamshi ^{[1
]}

Thillainayagam, Vigneshwar ^{[1
]}

机构：

[1] Univ Nebraska, Dept Text Clothing & Design, Lincoln, NE 68583 USA

来源：

AATCC REVIEW | 2007年 / 7卷 / 01期

关键词：

color repeatability; conditioning; inkjet printing; steaming;

D O I：

暂无

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

Unlike traditional printing, inkjet printing distributes thickeners and other auxiliaries evenly throughout the fabric and dries the fabric before printing, then uses inks with very low viscosity. Because of these and other differences, the color repeatability of inkjet printed fabrics is poor. A Delta E*(ab) larger than 5 is commonly observed between the same.,fabrics with the same treatment and inks, and from the same printer. To control color variations in inkjet printing, the effects of steaming and printhouse conditions on color repeatability have been studied. Parameters investigated include steaming time and temperature, wrapping paper, the position of fabrics in the steamer, and the printhouse humidity and temperature. Possible approaches for minimizing shade variations in inkjet printing are recommended.

引用

页码：45 / 48

页数：4

共 13 条

[1]

*AATCC, 2006, AATCC TECHN MAN, V81, P205

[2]

ASTON SO, 1993, J SOC DYERS COLOUR, V109, P147

[3]

Dawson TL, 2001, COLOR TECHNOL, V117, P185

[4]

Dawson TL, 2000, J SOC DYERS COLOUR, V116, P52

[5]

Ervine S, 2000, TEXT CHEM COLOR AM D, V32, P26

[6]

Fan QG, 2003, J IMAGING SCI TECHN, V47, P400

[7]

Li XF, 1999, TEXT CHEM COLOR AM D, V1, P37

[8]

SMITH B, 1987, TEXT CHEM COLOR, V19, P23

[9]

Tincher WC, 1998, TEXT CHEM COLOR, V30, P24

[10]

Yang YQ, 2006, J IMAGING SCI TECHN, V50, P181, DOI 10.2352/J.ImagingSci.Technol.(2006)50:2(181)

← 1 2 →