Experimental study on the phase inhomogeneity and separability in supercritical state of acetone fuel

被引:5
作者
Wei, Zhenhong [1 ]
Zhou, Yifan [1 ]
Cao, Yang [1 ]
Feng, Yiran [1 ]
Zhu, Qitian [1 ]
Zhang, Yuyin [1 ]
机构
[1] Shanghai Jiao Tong Univ, Sch Mech Engn, Shanghai, Peoples R China
关键词
Fuel spray; Supercritical state; Widom line; Pseudo-boiling; Phase transition; WIDOM-LINE; INJECTION; SPRAY; TRANSITION; SCATTERING; PROPANE;
D O I
10.1016/j.fuel.2022.123938
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Sufficient understanding of the supercritical state is important for exploring supercritical jet spray in thermodynamic cycle power machinery. However, in conventional studies, the phase division of supercritical state and supercritical jet spray is simple and rough, and whether the pseudo-boiling (or widom) line exists widely in various fluids, especially fossil fuels, is still not proved by experiments. In this paper, the phase inhomogeneity and separability in the supercritical state of fossil fuels are studied by using high-speed Mie scattering and UV LAS (ultraviolet-visible laser absorption/scattering) optical diagnostic techniques. Acetone is selected as the single representative component of fossil fuels. The results show that acetone is inhomogeneous in the supercritical state at fuel temperature T-f < 1.13T(c) and fuel pressure P-f < 1.74Pc, where T-c and P-c are the critical temperature and pressure, and can be further divided into liquid-like phase and gas-like phase, which is similar to the properties of inert fluids and simple fluids reported in previous literatures. The transition region (measured at interval of pressure 0.2 MPa) between the liquid-like phase and gas-like phase contains thermodynamic extremum lines such as constant pressure specific heat, volume expansion coefficient, and isothermal compression rate, which supports the view that the widom (or pseudo-boiling) line is used as the crossover in the supercritical state. When the state of acetone spray passes through the transition region, the liquid-like and gas like phases will have dramatic changes in the optical and macroscopic properties of spray (For example, when the injection temperature is equal to the critical temperature of 235 ?, the stable liquid-like areas crossing the pseudo-boiling line decreases by 9 times as much as that without crossing the pseudo-boiling line). The results of this paper have important reference values for the study of the supercritical spray atomization regime and the establishment of the simulation model.
引用
收藏
页数:13
相关论文
共 32 条
  • [1] Dieseline for Supercritical Injection and Combustion in Compression-Ignition Engines: Volatility, Phase Transitions, Spray/Jet Structure, and Thermal Stability
    Anitescu, George
    Bruno, Thomas J.
    Tavlarides, Lawrence L.
    [J]. ENERGY & FUELS, 2012, 26 (10) : 6247 - 6258
  • [2] Banuti D, 2016, SUPERCRITICAL PSEUDO, P211
  • [3] Similarity law for Widom lines and coexistence lines
    Banuti, D. T.
    Raju, M.
    Ihme, M.
    [J]. PHYSICAL REVIEW E, 2017, 95 (05) : 052120
  • [4] Crossing the Widom-line - Supercritical pseudo-boiling
    Banuti, D. T.
    [J]. JOURNAL OF SUPERCRITICAL FLUIDS, 2015, 98 : 12 - 16
  • [5] The Latent Heat of Supercritical Fluids
    Banuti, Daniel T.
    [J]. PERIODICA POLYTECHNICA-CHEMICAL ENGINEERING, 2019, 63 (02) : 270 - 275
  • [6] The absence of a dense potential core in supercritical injection: A thermal break-up mechanism
    Banuti, Daniel T.
    Hannemann, Klaus
    [J]. PHYSICS OF FLUIDS, 2016, 28 (03)
  • [7] Widom Line for the Liquid-Gas Transition in Lennard-Jones System
    Brazhkin, V. V.
    Fomin, Yu. D.
    Lyapin, A. G.
    Ryzhov, V. N.
    Tsiok, E. N.
    [J]. JOURNAL OF PHYSICAL CHEMISTRY B, 2011, 115 (48) : 14112 - 14115
  • [8] Visual characteristics and initial growth rates of round cryogenic jets at subcritical and supercritical pressures
    Chehroudi, B
    Talley, D
    Coy, E
    [J]. PHYSICS OF FLUIDS, 2002, 14 (02) : 850 - 861
  • [9] De Boer C., 2013, SAE Technical Paper No. 2013-01-0257
  • [10] De Boer C, 2010, Tech. Rep, SAE Technical Paper