Combustion Synthesis and Characterization of Bulk Nanocrystalline Fe88Si12 Alloy

被引:10
作者
Fu, Licai [1 ]
Yang, Jun [1 ]
Bi, Qinling [1 ]
Ma, Jiqiang [1 ]
Liu, Weimin [1 ]
机构
[1] Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China
基金
中国国家自然科学基金;
关键词
Combustion synthesis (CS); Fe88Si12; alloy; nanocrystalline; HIGH-TEMPERATURE SYNTHESIS; MAGNETIC-PROPERTIES; NANOSTRUCTURED METALS; MECHANICAL-PROPERTIES; BEHAVIOR; SILICON; STEEL; SHEET;
D O I
10.1109/TNANO.2009.2028023
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Bulk nanocrystalline Fe88Si12 alloy is fabricated by a combustion synthesis processing that is convenient, low in cost, and capable of being scaled up. The Fe88Si12 alloy consists of two phases: alpha-Fe(Si) and Fe3Si. It is a composite structure of meshwork dispersed in a matrix. The meshwork is a few micrometers in length and 0.5-1 mu m in diameter, and the grain size of the matrix is in the range of 5-15 nm. The nanocrystalline Fe88Si12 alloy is yielded at 1760 MPa with a large ductility of 14.6% in compressive test. Moreover, the coercive force of the product is approximately 3.6 A/m and saturation magnetization is about 196 emu/g. The results suggest that the product exhibits good mechanical behavior and soft magnet properties.
引用
收藏
页码:218 / 222
页数:5
相关论文
共 30 条
  • [1] RIBBON-FORM SILICON-IRON ALLOY CONTAINING AROUND 6.5-PERCENT SILICON
    ARAI, KI
    TSUYA, N
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 1980, 16 (01) : 126 - 129
  • [2] Bertotti G., 1994, LANDOLTBORNSTEIN, V19, P33
  • [3] The relationship of microstructure and magnetic properties in cold-rolled 6.5% Si-Fe alloy
    Bi, XF
    Tanaka, Y
    Sato, K
    Arai, KI
    Ishiyama, K
    Yamashiro, Y
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 1996, 32 (05) : 4818 - 4820
  • [4] NANOCRYSTALLINE MATERIALS
    BIRRINGER, R
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1989, 117 : 33 - 43
  • [5] Herzer G., 1997, HDB MAGNETIC MAT, V10
  • [7] Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys
    Koch, CC
    Youssef, KM
    Scattergood, RO
    Murty, KL
    [J]. ADVANCED ENGINEERING MATERIALS, 2005, 7 (09) : 787 - 794
  • [8] Newly developed electrical steel for high-frequency use
    Komatsubara, M
    Sadahiro, K
    Kondo, O
    Takamiya, T
    Honda, A
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2002, 242 (PART I) : 212 - 215
  • [9] Kubaschewski O., 1982, Iron-Binary Phase Diagrams
  • [10] Bulk nanocrystalline Fe3Al-based material prepared by aluminothermic reaction
    La, PQ
    Yang, J
    Cockayne, DJH
    Liu, WM
    Xue, QJ
    Li, YD
    [J]. ADVANCED MATERIALS, 2006, 18 (06) : 733 - +