Determination of electrical parameters of ITO/CZTS/CdS/Ag and ITO/CdS/CZTS/Ag heterojunction diodes in dark and illumination conditions

被引:18
作者
Gezgin, Serap Yigit [1 ]
Kilic, Hamdi Sukur [1 ,2 ,3 ]
机构
[1] Selcuk Univ, Fac Sci, Dept Phys, TR-42031 Selcuklu, Konya, Turkey
[2] Selcuk Univ, Directorate High Technol Res & Applicat Ctr, TR-42031 Selcuklu, Konya, Turkey
[3] Selcuk Univ, Directorate Laser Induced Proton Therapy Applicat, TR-42031 Selcuklu, Konya, Turkey
关键词
Diode; CZTS; CdS; PLD; Ideality factor; Efficiency; CDS THIN-FILMS; SOLAR-CELLS; OPTICAL-PROPERTIES; GRAIN-SIZE; MORPHOLOGICAL PROPERTIES; DEPOSITION; TEMPERATURE; EFFICIENCY; SUBSTRATE; CONTACT;
D O I
10.1007/s11082-019-2079-2
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
In this work, ITO/CZTS/CdS/Ag and ITO/CdS/CZTS/Ag heterojunction diodes has been produced, CdS and CZTS thin film layers of the diode have been produced on ITO glass at room temperature using PLD technique. It has been produced CZTS thin films that have a polycrystalline structure that were annealed at the sulfurization temperatures of 325 degrees C, 350 degrees C and 375 degrees C when as-grown CZTS thin film has the amorphous structure. CdS thin films have been grown on substrate at room temperature in 15, 20 and 25 min that have polycrystalline structures. Then, CdS thin film deposited for 20 min was annealed at 200 degrees C temperature and, has better crystal structure compared to other thin films. Diodes have been composed of CZTS thin film annealed in 375 degrees C, CdS thin film was grown during 20 min and, then annealed at 200 degrees C temperature. According to J-V characteristics of diode, diodes exhibit some rectification behaviour in dark and show a photo-electric property under illumination conditions. In this article, the ideality factors of diodes in dark condition have been calculated, their electrical parameters of J(sc), V-oc, FF and eta under the illumination condition have been determined and these electrical properties have been discussed in details.
引用
收藏
页数:22
相关论文
共 112 条
[11]   Effect of wide band-gap TCO properties on the bifacial CZTS thin-films solar cells performances [J].
Bouchama, Idris ;
Ali-Saoucha, Salim .
OPTIK, 2017, 144 :370-377
[12]   Is the Cu/Zn Disorder the Main Culprit for the Voltage Deficit in Kesterite Solar Cells? [J].
Bourdais, Stephane ;
Chone, Christophe ;
Delatouche, Bruno ;
Jacob, Alain ;
Larramona, Gerardo ;
Moisan, Camille ;
Lafond, Alain ;
Donatini, Fabrice ;
Rey, Germain ;
Siebentritt, Susanne ;
Walsh, Aron ;
Dennler, Gilles .
ADVANCED ENERGY MATERIALS, 2016, 6 (12)
[13]   Electrical properties and back contact study of CZTS/ZnS heterojunction [J].
Boutebakh, F. Z. ;
Zeggar, M. Lamri ;
Attaf, N. ;
Aida, M. S. .
OPTIK, 2017, 144 :180-190
[14]  
Breitenstein O., 2009, SOLID STATE PHENOM, V156-158, P1, DOI [10.4028/www.scientific.net/SSP.156-158.1, DOI 10.4028/WWW.SCIENTIFIC.NET/SSP.156-158.1]
[15]   Importance of CdS buffer layer thickness on Cu2ZnSnS4-based solar cell efficiency [J].
Cantas, A. ;
Turkoglu, F. ;
Meric, E. ;
Akca, F. G. ;
Ozdemir, M. ;
Tarhan, E. ;
Ozyuzer, L. ;
Aygun, G. .
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2018, 51 (27)
[16]  
Cazzaniga A.C., 2016, Fabrication of thin film CZTS solar cells with Pulsed Laser Deposition
[17]  
Chakrabarti P., 2006, J. Microwaves, V5, P1
[18]   Residual Stresses of Sputtering Titanium Thin Films at Various Substrate Temperatures [J].
Chang, R. C. ;
Chen, F. Y. ;
Chuang, C. T. ;
Tung, Y. C. .
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2010, 10 (07) :4562-4567
[19]   Above 10% efficiency earth-abundant Cu2ZnSn(S,Se)4 solar cells by introducing alkali metal fluoride nanolayers as electron-selective contacts [J].
Chen, Cheng-Ying ;
Aprillia, Bandiyah Sri ;
Chen, Wei-Chao ;
Teng, Yen-Ching ;
Chiu, Chih-Yuan ;
Chen, Ruei-San ;
Hwang, Jih-Shang ;
Chen, Kuei-Hsien ;
Chen, Li-Chyong .
NANO ENERGY, 2018, 51 :597-603
[20]   Comparative Study on the Structural, Morphological, Linear and Nonlinear Optical Properties of CZTS Thin Films Prepared by Spin-Coating and Spray Pyrolysis [J].
Chtouki, T. ;
Soumahoro, L. ;
Kulyk, B. ;
Bougharraf, H. ;
Erguig, H. ;
Ammous, K. ;
Sahraoui, B. .
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (04) :5146-5153