Design, Construction and Characterization of AC Atmospheric Pressure Air Non-thermal Plasma Jet

This paper presents the design and construction of non-thermal plasma jet device which was built in plasma phys. Dept., NRC, AEA, Egypt with a plasma application group. This design will be useful to initiate research in different fields such as low temperature plasma, polymer and biomedical applications. The experimental operation of this device is conducted with power supply of (10 kV, 30 mA, and 20 kHz). The discharge process takes place by using Air as input gas with different flow rates. The experimental results showed that the maximum plasma jet length of 7 mm is detected at air flow rate of 12 L/min. The electrical characteristics of discharge at different flow rates of Air such as discharge voltage, current, mean power, power efficiency, and energy have been studied by using potential dividers and Lissajous figure techniques. The results of plasma jet temperature along the jet length showed that the jet plasma has approximately a room temperature at the end of jet column.