Does the cyclic J-integral ΔJ describe the crack-tip opening displacement in the presence of crack closure?

被引：24
作者：
Metzger, M. [1 ,2 ]
Seifert, T. [1 ]
Schweizer, C. [2 ]
机构：
[1] Univ Appl Sci Offenburg, D-77652 Offenburg, Germany
[2] Fraunhofer Inst Mech Mat IWM, D-79108 Freiburg, Germany
来源：
ENGINEERING FRACTURE MECHANICS | 2015年 / 134卷
关键词：
J-integral; Cyclic J; Fatigue crack growth; Crack closure; Finite-element analysis; FATIGUE; GROWTH;
D O I：
10.1016/j.engfracmech.2014.07.017
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
In this paper, the correlation of the cyclic J-integral, Delta J, and the cyclic crack-tip opening displacement, Delta CTOD, is studied in the presence of crack closure to assess the question if Delta J describes the crack-tip opening displacement in this case. To this end, a method is developed to evaluate Delta J numerically within finite-element calculations. The method is validated for an elastic-plastic material that exhibits Masing behavior. Different strain ranges and strain ratios are considered under fully plastic cyclic conditions including crack closure. It is shown that the cyclic J-integral is the parameter to determine the cyclic crack-tip opening displacement even in cases where crack closure is present. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：459 / 473
页数：15
相关论文
共 22 条
  • [1] Brocks W., 2001, NUMERICAL ASPECTS PA
  • [2] ON THE PLASTIC AND VISCOPLASTIC CONSTITUTIVE-EQUATIONS .1. RULES DEVELOPED WITH INTERNAL VARIABLE CONCEPT
    CHABOCHE, JL
    ROUSSELIER, G
    [J]. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 1983, 105 (02): : 153 - 158
  • [3] Dowling, 1976, ASTM SPEC TECH PUBL, P82
  • [4] FATIGUE CRACK-GROWTH AND CLOSURE AT HIGH CYCLIC STRAINS
    DOWLING, NE
    IYYER, NS
    [J]. MATERIALS SCIENCE AND ENGINEERING, 1987, 96 : 99 - 107
  • [5] Frederick CO, 2007, MATER HIGH TEMP, V24, P11
  • [6] Heitmann H. H., 1984, ADV FRACTURE RES, P599
  • [7] Hibbit D, ABAQUS THEORY MANUAL
  • [8] SINGULAR BEHAVIOUR AT END OF A TENSILE CRACK IN A HARDENING MATERIAL
    HUTCHINSON, JW
    [J]. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1968, 16 (01) : 13 - +
  • [9] INVESTIGATION ON PATH-INTEGRAL EXPRESSION OF THE J-INTEGRAL RANGE USING NUMERICAL SIMULATIONS OF FATIGUE CRACK-GROWTH
    KUBO, S
    YAFUSO, T
    NOHARA, M
    ISHIMARU, T
    OHJI, K
    [J]. JSME INTERNATIONAL JOURNAL SERIES I-SOLID MECHANICS STRENGTH OF MATERIALS, 1989, 32 (02): : 237 - 244
  • [10] A COMPARISON OF METHODS FOR CALCULATING ENERGY-RELEASE RATES
    LI, FZ
    SHIH, CF
    NEEDLEMAN, A
    [J]. ENGINEERING FRACTURE MECHANICS, 1985, 21 (02) : 405 - 421
123