Consolidation of titanium carbide with zirconium carbide by Spark Plasma Sintering

被引：9

作者：

Li, Ying ^{[1
]}

Katsui, Hirokazu ^{[1
]}

Goto, Takashi ^{[1
]}

机构：

[1] Tohoku Univ, Inst Mat Res, Sendai, Miyagi 9808577, Japan

来源：

ADVANCED CERAMICS AND NOVEL PROCESSING | 2014年 / 616卷

关键词：

spark plasma sintering; solid solution; TI(C; N) CERMET TOOLS; MO-NI CERMETS; MECHANICAL-PROPERTIES; FRACTURE-TOUGHNESS; WC; MICROSTRUCTURE; ZRC;

D O I：

10.4028/www.scientific.net/KEM.616.52

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Titanium carbide (TiC) was consolidated with 20 mol% zirconium carbide (ZrC) by spark plasma sintering in the temperature range of 1773-2473 K, and the phase formation, microstructure, relative density and mechanical properties were investigated. The composite consisted of Ti-rich (Ti, Zr)C and Zr-rich (Zr, Ti) C solid solutions at 1773-2373 K, and was single-phase (Ti, Zr) C at 2473 K. The relative density of the composite was over 98% above 2073 K. The composite prepared at 2273 K exhibited the maximum H-V of 29.7 GPa with the K-IC of 3.76 MPa m(1/2).

引用

页码：52 / 55

页数：4

共 12 条

[1]

[Anonymous], 2000, CRC MAT SCI ENG HDB, DOI DOI 10.1201/9781420038408

[2] A CRITICAL-EVALUATION OF INDENTATION TECHNIQUES FOR MEASURING FRACTURE-TOUGHNESS .1. DIRECT CRACK MEASUREMENTS [J].

ANSTIS, GR ;

CHANTIKUL, P ;

LAWN, BR ;

MARSHALL, DB .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1981, 64 (09) :533-538

[3] Densification and mechanical properties of TiC by SPS-effects of holding time, sintering temperature and pressure condition [J].

Cheng, Lixia ;

Xie, Zhipeng ;

Liu, Guanwei ;

Liu, Wei ;

Xue, Weijiang .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (12) :3399-3406

[4] MICROSTRUCTURAL EVOLUTION DURING THE SINTERING OF TIC-MO-NI CERMETS [J].

CHUN, DI ;

KIM, DY ;

EUN, KY .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1993, 76 (08) :2049-2052

[5] HOT-PRESSING OF SIC-TIC COMPOSITES [J].

ENDO, H ;

UEKI, M ;

KUBO, H .

JOURNAL OF MATERIALS SCIENCE, 1990, 25 (05) :2503-2506

[6] Migration of intergranular liquid films and formation of core-shell grains in sintered TiC-Ni bonded to WC-Ni [J].

Ko, JY ;

Park, SY ;

Yoon, DY ;

Kang, SJL .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2004, 87 (12) :2262-2267

[7]

Koc R, 1997, J AM CERAM SOC, V80, P952, DOI 10.1111/j.1151-2916.1997.tb02926.x

[8] Effect of group IV elements on the cutting characteristics of Ti(C,N) cermet tools and reliability analysis [J].

Kwon, WT ;

Park, JS ;

Kang, SH .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 166 (01) :9-14

[9] Effect of WC and group IV carbides on the cutting performance of Ti(C,N) cermet tools [J].

Kwon, WT ;

Park, JS ;

Kim, SW ;

Kang, SH .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (04) :341-346

[10] Reactive sintering of ZrC-TiC composites [J].

Yung, Der-Liang ;

Kollo, Lauri ;

Hussainova, Irina ;

Zikin, Arkadi .

ENGINEERING MATERIALS AND TRIBOLOGY, 2013, 527 :20-25

← 1 2 →