Flexible Control Strategy for Enhancing Power Injection Capability of Three-Phase Four-Wire Inverter During Asymmetrical Grid Faults

A three-phase four-wire inverter is highly suitable for low-voltage distributed grids owing to its zero sequence control; however, essential aspects of grid-following inverters during faults, such as the power oscillation control flexibility and power injection capability, are rarely discussed in detail. Thus, by introducing zero sequence instantaneous power into a four-wire system, this article proposes a flexible control strategy that enhances the power injection capability of the inverter in the photovoltaic generation system during asymmetrical grid faults. First, a generalized reference current generation with flexible control of positive, negative, zero sequence current (FPNZSC), and power oscillations is presented. Second, a maximum allowable power injection (MAPI) algorithm based on the actual value constraints of power oscillations and peak current is presented according to the requirement. The proposed MAPI-FPNZSC strategy further extends the existing fault ride through methods in three-wire inverter systems, which is also suitable for single line-to-ground and double line-to-ground faults and can be easily realized in the natural or stationary frame. The effectiveness of the proposed strategy is verified by comparing the provided three typical objectives with the traditional method, and tested in a real-time hardware-in-the loop experimental platform.