Face milling of BN added steels

被引：0
|
作者：
Tanaka, R [1 ]
Yamane, Y [1 ]
Sekiya, K [1 ]
Narutaki, N [1 ]
Shiraga, T [1 ]
机构：
[1] Hiroshima Univ, Higashihiroshima 7390046, Japan
来源：
PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY | 2002年
关键词：
machinability; face milling; free-machining steel; BN; crater wear; carbide tool; coated tool;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper deals with machinability of BN added steels in face milling. When face milling the steels with a carbide tool P 10 or a cermet tool, flank wear of the tool was reduced but maximum crater depth was increased than that in milling S45C. In case of cutting the BN added steels in low oxygen atmosphere with P 10, crater depth was reduced than that in air. When face milling the steel with a TiCN coated carbide tool, flank wear and crater wear rate were reduced compare to machining S45C. It was concluded that the machinability of BN added steels in face milling was influenced by tool materials, Al, B and N content of work materials and cutting atmosphere. Among the tested tools, TiCN coated carbide tool was the most suitable in face milling BN added steels.
引用
收藏
页码：105 / 110
页数：6
相关论文
共 50 条
  • [41] Analysis of Material Removal Efficiency in Face Milling of Aluminum Alloy
    Kundrak, Janos
    Molnar, Viktor
    Makkai, Tamas
    Dagi, Tamas
    ADVANCES IN MANUFACTURING II, VOL 4 - MECHANICAL ENGINEERING, 2019, : 393 - 404
  • [42] CHATTER PREDICTION FOR FACE MILLING PROCESS OF WORKPIECES WITH VARIABLE STIFFNESS
    Li, Guilong
    Du, Shichang
    Huang, Delin
    Zhao, Chen
    Deng, Yafei
    PROCEEDINGS OF THE ASME 14TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2019, VOL 1, 2019,
  • [43] Optimization of machining economics and energy consumption in face milling operations
    Wang, Yi-Chi
    Kim, Dong-Won
    Katayama, Hiroshi
    Hsueh, Wen-Chin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (9-12) : 2093 - 2100
  • [44] Cutting Force and Tool Wear in Face Milling of Hardened Steel
    Cui, Xiaobin
    Zhao, Jun
    HIGH SPEED MACHINING V, 2012, 723 : 77 - 81
  • [45] Development of intelligent system to minimize burr formation in face milling
    Y.J. Kim
    J.H. Kim
    S.L. Ko
    B.K. Kim
    The International Journal of Advanced Manufacturing Technology, 2006, 29 : 879 - 884
  • [46] Studies on the Effect of Approach Angle and Process Parameters in Face Milling
    Rao, Sadasiva T.
    Satyanarayana, K.
    Praneeth, Y.
    Gopal, Venu A.
    MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 3147 - 3155
  • [47] Development of intelligent system to minimize burr formation in face milling
    Kim, Y. J.
    Ko, S. L.
    Kim, J. H.
    Kim, B. K.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 29 (9-10) : 879 - 884
  • [48] High speed face milling of a aluminium silicon alloy casting
    Ng, EG
    Szablewski, D
    Dumitrescu, M
    Elbestawi, MA
    Sokolowski, JH
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2004, 53 (02) : 69 - 72
  • [49] Modeling Static Cutting Forces And Stresses in the Face Milling Inserts
    Kyung, Richard
    Yim, Jesang
    2020 IEEE INTERNATIONAL IOT, ELECTRONICS AND MECHATRONICS CONFERENCE (IEMTRONICS 2020), 2020, : 557 - 560
  • [50] FACE MILLING OF INCONEL-718 WITH CEMENTED CARBIDE TOOLS
    OHTANI, T
    FUJISE, K
    INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING, 1995, 29 (01): : 48 - 49
12345