Face milling of BN added steels

被引：0

作者：

Tanaka, R ^{[1
]}

Yamane, Y ^{[1
]}

Sekiya, K ^{[1
]}

Narutaki, N ^{[1
]}

Shiraga, T ^{[1
]}

机构：

[1] Hiroshima Univ, Higashihiroshima 7390046, Japan

来源：

PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY | 2002年

关键词：

machinability; face milling; free-machining steel; BN; crater wear; carbide tool; coated tool;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper deals with machinability of BN added steels in face milling. When face milling the steels with a carbide tool P 10 or a cermet tool, flank wear of the tool was reduced but maximum crater depth was increased than that in milling S45C. In case of cutting the BN added steels in low oxygen atmosphere with P 10, crater depth was reduced than that in air. When face milling the steel with a TiCN coated carbide tool, flank wear and crater wear rate were reduced compare to machining S45C. It was concluded that the machinability of BN added steels in face milling was influenced by tool materials, Al, B and N content of work materials and cutting atmosphere. Among the tested tools, TiCN coated carbide tool was the most suitable in face milling BN added steels.

引用

页码：105 / 110

页数：6

共 50 条

[31] Direct Part Marking by Vibration Assisted Face Milling
Denkena, Berend
Grove, Thilo
Seibel, Alexander
3RD INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: NEW CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING, 2016, 26 : 185 - 191
[32] Predicting milling force variation in time and space domain for multi-toothed face milling
Liu, Shun
Jin, Sun
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 108 (7-8) : 2269 - 2283
[33] Analysis of Thermal Fracture in Face Milling (Part One)
Wang Zhiyong Dong Shen Yuan Zhejun (Department of Mechanical Engineering)
哈尔滨工业大学学报, 1990, (03) : 132 - 136
[34] Predicting milling force variation in time and space domain for multi-toothed face milling
Shun Liu
Sun Jin
The International Journal of Advanced Manufacturing Technology, 2020, 108 : 2269 - 2283
[35] Investigation of the effects of face-milling parameters of ultra-large-scale plane on milling quality
Wu, Wei-Piao
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 37 (3-4) : 241 - 249
[36] Effect of the Relative Position of the Face Milling Tool towards the Workpiece on Machined Surface Roughness and Milling Dynamics
Pimenov, Danil Yurievich
Hassui, Amauri
Wojciechowski, Szymon
Mia, Mozammel
Magri, Aristides
Suyama, Daniel, I
Bustillo, Andres
Krolczyk, Grzegorz
Gupta, Munish Kumar
APPLIED SCIENCES-BASEL, 2019, 9 (05):
[37] Investigation of the effects of face-milling parameters of ultra-large-scale plane on milling quality
Wei-Piao Wu
The International Journal of Advanced Manufacturing Technology, 2008, 37 : 241 - 249
[38] Investigations into the influence of the geometry of face milling cutters on the quality formation
Heisel, Uwe
Ivanova, Stoyanka
WOOD MATERIAL SCIENCE & ENGINEERING, 2012, 7 (03) : 134 - 142
[39] Vibration analysis and energy efficiency in interrupted face milling processes
de Carvalho, Hugo M. B.
Gomes, Jefferson de Oliveira
Schmidt, Marco Antonio
Brandao, Vitor L. C.
22ND CIRP CONFERENCE ON LIFE CYCLE ENGINEERING, 2015, 29 : 245 - 250
[40] ANALYSIS AND CONTROL OF BURR FORMATION IN FACE MILLING OF ALUMINIUM ALLOY
Matyasi, Gy
Rakita, T.
13TH INTERNATIONAL CONFERENCE ON TOOLS, 2012, : 293 - 298

← 1 2 3 4 5 →