Face milling of BN added steels

被引：0
|
作者：
Tanaka, R [1 ]
Yamane, Y [1 ]
Sekiya, K [1 ]
Narutaki, N [1 ]
Shiraga, T [1 ]
机构：
[1] Hiroshima Univ, Higashihiroshima 7390046, Japan
来源：
PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY | 2002年
关键词：
machinability; face milling; free-machining steel; BN; crater wear; carbide tool; coated tool;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper deals with machinability of BN added steels in face milling. When face milling the steels with a carbide tool P 10 or a cermet tool, flank wear of the tool was reduced but maximum crater depth was increased than that in milling S45C. In case of cutting the BN added steels in low oxygen atmosphere with P 10, crater depth was reduced than that in air. When face milling the steel with a TiCN coated carbide tool, flank wear and crater wear rate were reduced compare to machining S45C. It was concluded that the machinability of BN added steels in face milling was influenced by tool materials, Al, B and N content of work materials and cutting atmosphere. Among the tested tools, TiCN coated carbide tool was the most suitable in face milling BN added steels.
引用
收藏
页码：105 / 110
页数：6
相关论文
共 50 条
  • [1] End milling of free-machining Steel for high speed machining tool wear and cutting temperature in cutting BN added steels
    Seimitsu Kogaku Kaishi, 2007, 7 (803-807): : 803 - 807
  • [2] Performance of cutting fluids during face milling of steels
    Vieira, JM
    Machado, AR
    Ezugwu, EO
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 116 (2-3) : 244 - 251
  • [3] Influence of the number of inserts for tool life evaluation in face milling of steels
    Richetti, A
    Machado, AR
    Da Silva, MB
    Ezuguwu, EO
    Bonney, J
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (7-8) : 695 - 700
  • [4] Dry face milling of titanium alloys
    Hassan, A
    Yao, ZQ
    JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2004, 11 (06): : 545 - 548
  • [5] Productivity considerations in face milling
    Kundrák J.
    Molnár V.
    Deszpoth I.
    Makkai T.
    Materials Science Forum, 2019, 952 : 66 - 73
  • [6] Analysis of the behaviour effect of face cutting edge inserts on surface roughness when milling steels with MQL lubrication
    Saluena-Berna, X.
    Ortiz-Marzo, J. A.
    Casals-Terre, J.
    ADVANCES IN MATERIALS PROCESSING TECHNOLOGIE, 2006, 526 : 25 - 30
  • [7] Dry face milling of titanium alloys
    Ahmed Hassan
    Journal of University of Science and Technology Beijing(English Edition), 2004, (06) : 545 - 548
  • [8] The reasonable geometric parameter on the face milling
    Li, SJ
    Yan, XG
    Zhang, PK
    PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY, 2002, : 739 - 742
  • [9] A study of high efficiency face milling tools
    Chang, CS
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 100 (1-3) : 12 - 29
  • [10] MODELLING AND SIMULATION OF SURFACE ROUGHNESS IN FACE MILLING
    Simunovic, G.
    Simunovic, K.
    Saric, T.
    INTERNATIONAL JOURNAL OF SIMULATION MODELLING, 2013, 12 (03) : 141 - 153
12345