Unaligned inductance calculation using flux tube approach for rotor conducting screen-based SRM

被引:1
作者
Abdel-Aziz, Aly A. [1 ]
Ahmed, Khaled H. [1 ,2 ]
Massoud, Ahmed M. [3 ]
Williams, Barry W. [1 ]
机构
[1] Univ Strathclyde, Dept Elect & Elect Engn, Glasgow, Lanark, Scotland
[2] Alexandria Univ, Dept Elect Engn, Fac Engn, Alexandria, Egypt
[3] Qatar Univ, Dept Elect Engn, Coll Engn, Doha 2713, Qatar
关键词
All Open Access; Gold; Green;
D O I
10.1049/elp2.12082
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This article investigates the effect of utilising rotor conducting screens within a switched reluctance machine (SRM). Conducting, non-magnetic materials such as aluminium or copper are inserted into the interpole regions of the rotor. The effective unaligned inductance decreases, which increases the conversion area allowing the machine to develop more power. Predicting machine performance implies knowing the value of the unaligned inductance. A procedure for calculating the effective unaligned inductance for screened motors using the flux tube method is presented. Finite element analysis results establish the validity of the proposed calculation method. A detailed design procedure for screened SRM is presented.
引用
收藏
页码:1081 / 1094
页数:14
相关论文
共 21 条
[1]  
Chau KT, 2015, ELECTRIC VEHICLE MACHINES AND DRIVES: DESIGN, ANALYSIS AND APPLICATION, P108
[2]   Torque Density and Efficiency Improvements of a Switched Reluctance Motor Without Rare-Earth Material for Hybrid Vehicles [J].
Chiba, Akira ;
Takano, Yuichi ;
Takeno, Motoki ;
Imakawa, Takashi ;
Hoshi, Nobukazu ;
Takemoto, Masatsugu ;
Ogasawara, Satoshi .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2011, 47 (03) :1240-1246
[3]   Novel Switched Reluctance Machine Configuration With Higher Number of Rotor Poles Than Stator Poles: Concept to Implementation [J].
Desai, Piyush C. ;
Krishnamurthy, Mahesh ;
Schofield, Nigel ;
Emadi, Ali .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2010, 57 (02) :649-659
[4]   Conducting screen utilisation in switched reluctance motors [J].
Dessouky, YG ;
Williams, BW ;
Fletcher, JE .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 1999, 14 (04) :946-951
[5]   Multiobjective System Level Optimization Method for Switched Reluctance Motor Drive Systems Using Finite-Element Model [J].
Diao, Kaikai ;
Sun, Xiaodong ;
Lei, Gang ;
Guo, Youguang ;
Zhu, Jianguo .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2020, 67 (12) :10055-10064
[6]   A Review on Machine Topologies and Control Techniques for Low-Noise Switched Reluctance Motors in Electric Vehicle Applications [J].
Gan, Chun ;
Wu, Jianhua ;
Sun, Qingguo ;
Kong, Wubin ;
Li, Hongyu ;
Hu, Yihua .
IEEE ACCESS, 2018, 6 :31430-31443
[7]   Investigation of Skewing Effects on the Vibration Reduction of Three-Phase Switched Reluctance Motors [J].
Gan, Chun ;
Wu, Jianhua ;
Shen, Mengjie ;
Yang, Shiyou ;
Hu, Yihua ;
Cao, Wenping .
IEEE TRANSACTIONS ON MAGNETICS, 2015, 51 (09)
[8]   High-speed performance improvements of a two-phase switched reluctance machine utilizing rotor-conducting screens [J].
Hamdy, R ;
Fletcher, JE ;
Williams, BW ;
Finney, SJ .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2002, 17 (04) :500-506
[9]  
Hutton A. J., 1989, Fourth International Conference on Electrical Machines and Drives (Conf. Publ. no.310), P312
[10]   Three-Phase 24/16 Switched Reluctance Machine for a Hybrid Electric Powertrain [J].
Jiang, James Weisheng ;
Bilgin, Berker ;
Emadi, Ali .
IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION, 2017, 3 (01) :76-85