Temperature dependence of the spectral properties of Yb3+/P5+/Al3+ co-doped silica fiber core glasses

Yb3+/P5+/Al3+ co-doped silica fiber core glasses with different P5+/Al3+ molar ratios were prepared by the sol-gel method and modified chemical vapor deposition (MCVD) method. The absorption and fluorescence spectra were measured using a temperature range from 25 degrees C to 200 degrees C. Results show that both the major absorption and emission peaks of the Yb3+ ions become weaker and wider with the temperature increasing. The absorption cross sections of HYPA1 (the molar compositions of 0.2Yb(2)O(3)-2P(2)O(5)-2Al(2)O(3)-95.8SiO(2)) preform slices made by MCVD with a composition similar to the commercial 20/400 ytterbium-doped silica fibers (YDFs) decrease by similar to 31.8% (915 nm), similar to 25.3% (940nm) and similar to 41.6% (975 nm), in addition, the emission cross sections decrease by similar to 32.1% (1030 nm) and similar to 22.7% (1080 nm), respectively, all which indicate the decline of the laser properties with the temperature increasing of Yb3+ doped glass samples. The highest absorption peak at 975 nm of HYPA1 is blue-shifted by 0.80 nm as temperature raised from 25 degrees C to 200 degrees C and the absorption coefficient of the peak wavelength is reduced by nearly 5%. Additionally, the results also demonstrate that the R-abs (the ratio of sigma(abs)@975 nm/sigma(abs)@915 nm) and R-em (the ratio of sigma(em)@1030 nm/sigma(em)@1080 nm) are affected not only by the P5+/Al3+ molar ratio but also by the temperature. This work is helpful for understanding the fiber laser performance variations with the increase of the fiber core temperature due to high power operation. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement