Research on torque ripple suppression of BLDCM method based on Cuk converter

被引：0
|
作者：
Tong Jun [1 ]
Li Xiang [1 ]
Li Wenquan [1 ]
Li Facheng [1 ]
Yang Xingchen [1 ]
机构：
[1] Xian Univ Sci & Technol, Coll Elect & Control Engn, Xian 710054, Shaanxi, Peoples R China
来源：
2019 THE 5TH INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING, CONTROL AND ROBOTICS (EECR 2019) | 2019年 / 533卷
关键词：
BLDCM; Cuk converter; Commutation torque ripple suppression; MATLAB simulation; COMMUTATION;
D O I：
10.1088/1757-899X/533/1/012020
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Due to the different manufacturing process and control mode, the commutation torque ripple will occur in the operation of BLDCM(Brushless DC motor). In this paper, the problem of BLDCM torque ripple is analyzed theoretically. In order to suppress the torque ripple during commutation, a method of combining Cuk converter with power inverter circuit is proposed. By changing the bus voltage, the DC bus voltage can be reduced at low speed and increased at high speed, so that the torque ripple of BLDCM can be suppressed at full speed. The simulation results are verified by MATLAB/Simulink, and the simulation results show the effectiveness of the method.
引用
收藏
页数：8
相关论文
共 50 条
  • [21] Cuk PFC Converter Based on Variable Inductor
    Yan, Tiesheng
    Chen, Tong
    Huang, Ao
    Chen, Wenyuan
    Cao, Taiqiang
    ELECTRONICS, 2023, 12 (10)
  • [22] Mitigation of Torque Ripple in BLDC Motor using Modified SEPIC Converter
    Kumar, Dileep
    Gupta, Ram Avtar
    2018 8TH IEEE INDIA INTERNATIONAL CONFERENCE ON POWER ELECTRONICS (IICPE), 2018,
  • [23] The research on BLDCM control system based on DSP
    He Qing
    Wang Yu
    2015 34TH CHINESE CONTROL CONFERENCE (CCC), 2015, : 4388 - 4392
  • [24] A New Approach of Minimizing Commutation Torque Ripple for Brushless DC Motor Based on DC-DC Converter
    Shi, Tingna
    Guo, Yuntao
    Song, Peng
    Xia, Changliang
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2010, 57 (10) : 3483 - 3490
  • [25] Study of Closed loop Cuk converter controlled by Loop Shaping Method
    Rayeen, Zeeshan
    Bose, Sourav
    Dwivedi, Prakash
    2018 IEEE 13TH INTERNATIONAL CONFERENCE ON INDUSTRIAL AND INFORMATION SYSTEMS (IEEE ICIIS), 2018, : 442 - 447
  • [26] Research on BLDCM Speed Control System Based on MFNN-PID Control Method
    Wang, Xin
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6, 2012, 121-126 : 3714 - 3718
  • [27] Parameter estimation for BLDCM in rescue hoist drive and reduction of torque ripple and winding loss using conditional extremum current model
    Chun Fang
    Manfeng Dou
    Bo Tan
    Jianwei Yang
    Cluster Computing, 2019, 22 : 4775 - 4784
  • [28] A Proposed Cuk Converter based Dual Input Hybrid Converter Topology as EV Charging Station
    Chamarthi, Phani Kumar
    Rahman, S. M. Imrat
    Moghassemi, Ali
    Timilsina, Laxman
    Ciftci, Okan
    Papari, Behnaz
    Ozkan, Gokhan
    Edrington, Christopher S.
    2024 IEEE TRANSPORTATION ELECTRIFICATION CONFERENCE AND EXPO, ITEC 2024, 2024,
  • [29] A Novel Method Based on Delaying Hall Signal for Reducing Torque Ripple of Brushless DC Motor
    Yao, Xuliang
    Jiang, Xiaoming
    Zhang, Yan
    Yang, Guangyi
    Chang, Yingjian
    PROCEEDINGS OF THE IECON 2016 - 42ND ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2016, : 2642 - 2647
  • [30] Observer Based Adaptive PI Sliding Mode Controller for Cuk Converter
    Subroto, Ramadhani Kurniawan
    Ardhenta, Lunde
    Lian, Kuo-Lung
    PROCEEDINGS OF THE 2019 6TH INTERNATIONAL CONFERENCE ON INSTRUMENTATION, CONTROL, AND AUTOMATION (ICA), 2019, : 82 - 87
12345