Evaluation of stress concentration of U-shaped notch based on residual magnetic field measurements

被引：6
|
作者：
Bao, Sheng [1 ]
Jin, Pengfei [1 ]
Zhao, Zhengye [1 ]
Luo, Qiang [1 ]
机构：
[1] Zhejiang Univ, Inst Struct Engn, Hangzhou 310058, Zhejiang, Peoples R China
来源：
STRAIN | 2019年 / 55卷 / 06期
关键词：
residual stress; stress concentration; tangential RMF signal; U-shaped notch; MEMORY SIGNAL;
D O I：
10.1111/str.12328
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this research, the correlation between the stress concentration and the residual magnetic field (RMF) of 30Cr steel was investigated. Tensile tests were carried out to measure the RMF signals on the surface of U-shaped defect specimens. It was found that the tangential RMF signal at the defect area is correlated to the applied load and the stress concentration factor. A new method based on magnetic field to evaluate the stress concentration degree is proposed. This research provides a potential possibility for quantitative inspection of the stress concentration in ferromagnetic steels using the RMF measurements.
引用
收藏
页数：13
相关论文
共 50 条
  • [1] Quantitative evaluation of stress concentration in ferromagnetic steels based on residual magnetic field measurements
    Bao, S.
    Jin, P. F.
    Zhao, Z. Y.
    Fu, M. L.
    INSIGHT, 2019, 61 (07) : 389 - 394
  • [2] Evaluation of stress concentration of a low-carbon steel based on residual magnetic field measurements
    Bao, S.
    Fu, M. L.
    Lou, H. J.
    Bai, S. Z.
    Hu, S. N.
    INSIGHT, 2016, 58 (12) : 678 - 682
  • [3] A simplified method for evaluating singular stress field and fatigue strength of U-shaped notch
    Shen, Wei
    Qiu, Yu
    Yan, RenJun
    Xu, Linzhi
    Liu, Enqian
    MARINE STRUCTURES, 2020, 72
  • [4] Evaluation of residual stress in ferromagnetic steels based on residual magnetic field measurements
    Roskosz, Maciej
    Bieniek, Michal
    NDT & E INTERNATIONAL, 2012, 45 (01) : 55 - 62
  • [5] Analysis of the universality of the residual stress evaluation method based on residual magnetic field measurements
    Roskosz, Maciej
    Bieniek, Michal
    NDT & E INTERNATIONAL, 2013, 54 : 63 - 68
  • [6] Stress concentration factors for three-point bending beam with single-edge U-shaped notch
    School of Architecture and Environment, Sichuan Univ., Chengdu 610065, China
    Sichuan Daxue Xuebao (Gongcheng Kexue Ban), 2007, 3 (1-6):
  • [7] Evaluation of the brittle failure of blunt U-shaped notch under mode I loading
    Chen, D. H.
    Fan, X. L.
    ENGINEERING FRACTURE MECHANICS, 2019, 214 : 40 - 61
  • [8] Investigation of Residual Stress in U-shaped Block by Using Ultrasonic and Finite Element Method
    Li, Zhi-xiang
    Xu, Chun-guang
    Wu, Kai
    Lu, Yu-ren
    PROCEEDINGS OF 2018 IEEE FAR EAST NDT NEW TECHNOLOGY & APPLICATION FORUM (IEEE FENDT 2018), 2018, : 147 - 151
  • [9] Stress intensity factor of a crack from a double U-shaped notch in a finite plate under a tensile stress
    Miyazaki T.
    Ferdous Md.S.
    Makabe C.
    Fujikawa M.
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2010, 76 (772): : 1618 - 1625
  • [10] Investigation on Small Punch Test with U-shaped Notch and Its Simulation
    Wang K.
    Zhao X.
    Zheng S.
    Li Y.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2021, 57 (02): : 80 - 86
12345