Equations of state for basin geofluids: algorithm review and intercomparison for brines

Physical properties of formation waters in sedimentary basins can vary by more than 25% for density and by one order of magnitude for viscosity. Density differences may enhance or retard flow driven by other mechanisms and can initiate buoyancy-driven flow. For a given driving force, the flow rate and injectivity depend on viscosity and permeability. Thus, variations in the density and viscosity of formation waters may have or had a significant effect on the flow pattern in a sedimentary basin, with consequences for various basin processes. Therefore, it is critical to correctly estimate water properties at formation conditions for proper representation and interpretation of present flow systems, and for numerical simulations of basin evolution, hydrocarbon migration, ore genesis, and fate of injected fluids in sedimentary basins. Algorithms published over the years to calculate water density and viscosity as a function of temperature, pressure and salinity are based on empirical fitting of laboratory-measured properties of predominantly NaCl solutions, but also field brines. A review and comparison of various algorithms are presented here, both in terms of applicability range and estimates of density and viscosity. The paucity of measured formation-water properties at in situ conditions hinders a definitive conclusion regarding the validity of any of these algorithms. However, the comparison indicates the versatility of the various algorithms in various ranges of conditions found in sedimentary basins. The applicability of these algorithms to the density of formation waters in the Alberta Basin is also examined using a high-quality database of 4854 water analyses. Consideration is also given to the percentage of cations that are heavier than Na in the waters.