Heat treatment of codeposited aluminium-silicon coatings on ferritic steels by CVD-FBR technology

被引：13

作者：

Brossard, J. M. ^{[1
]}

Hierro, M. P. ^{[1
]}

Trilleros, J. A. ^{[1
]}

Carpintero, M. C. ^{[1
]}

Sanchez, L. ^{[1
]}

Bolivar, F. J. ^{[1
]}

Perez, F. J. ^{[1
]}

机构：

[1] Univ Complutense Madrid, Fac Ciencias Quim, Dpto CC, E-28040 Madrid, Spain

来源：

SURFACE & COATINGS TECHNOLOGY | 2007年 / 201卷 / 12期

关键词：

coatings; CVD-FBR; firtermetallic Fe-Al; ferritic steels; CHEMICAL-VAPOR-DEPOSITION; FLUIDIZED-BED; CORROSION; AL; FE; SI; CR; SUPERALLOYS; OXIDATION; NICKEL;

D O I：

10.1016/j.surfcoat.2006.03.048

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Ferritic steels are often used in boiler or supercritical steam turbines which operate at temperatures between 600-650 degrees C under pressure. Nowadays generation energy industries are interested in increasing the efficiency of the turbines. Increase of the operation temperature should meet this objective. In this study Al/Si protective coatings are developed by CVD-FBR at moderate temperature to respect substrates mechanical properties. Al-Si codeposition had been formed on three ferritic steels (P-91, P-92 and HCM-12 A). The initial parameters of the process were optimized by thermodynamic calculations using Thermo-Calc software. Then, those parameters were used in the experiments to obtain Al-Si coatings at low temperature and atmospheric pressure. Fe-Al intermetallic coatings containing Cr and Si were obtained. The effect of diffusion heat treatment was studied in order to allow the phase transformation from Fe2Al5 (brittle phase) to lower Al content phases such as FeAl (more fracture toughness). (c) 2006 Elsevier B.V All rights reserved.

引用

页码：5743 / 5750

页数：8

共 29 条

[1]

ARAV F, 1992, P 5 INT C CREEP MAT

[2] VOLATILE SPECIES IN HALIDE-ACTIVATED DIFFUSION COATING PACKS [J].

BIANCO, R ;

RAPP, RA ;

JACOBSON, NS .

OXIDATION OF METALS, 1992, 38 (1-2) :33-43

[3] Local modeling of mass transfer with chemical reactions in a gas-solid fluidized bed. Application to the chemical vapor deposition of silicon from silanes [J].

Caussat, B ;

Hemati, M ;

Couderc, JP .

POWDER TECHNOLOGY, 1999, 101 (01) :43-55

[4] SIMULTANEOUS CHROMIZING AND ALUMINIZING OF IRON-BASE ALLOYS [J].

CHOQUET, PA ;

NAYLOR, ER ;

RAPP, RA .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1989, 120 :413-418

[5] Deposition of aluminium on magnesium by a CVD process [J].

Christoglou, C ;

Voudouris, N ;

Angelopoulos, GN ;

Pant, M ;

Dahl, W .

SURFACE & COATINGS TECHNOLOGY, 2004, 184 (2-3) :149-155

[6] Formation and modelling of aluminide coatings on iron by a fluidised bed CVD process [J].

Christoglou, C ;

Voudouris, N ;

Angelopoulos, GN .

SURFACE & COATINGS TECHNOLOGY, 2002, 155 (01) :51-58

[7] The effects of active element additions on the oxidation performance of a platinum aluminide coating at 1100 °C [J].

Fisher, G ;

Datta, PK ;

Burnell-Gray, JS ;

Chan, WY ;

Soares, JC .

SURFACE & COATINGS TECHNOLOGY, 1998, 110 (1-2) :24-30

[8] Utilizing biomass and waste for power production - a decade of contributing to the understanding, interpretation and analysis of deposits and corrosion products [J].

Frandsen, FJ .

FUEL, 2005, 84 (10) :1277-1294

[9] THE EFFECTS OF CHLORIDES, HYDROGEN-CHLORIDE, AND SULFUR-DIOXIDE IN THE OXIDATION OF STEELS BELOW DEPOSITS [J].

GRABKE, HJ ;

REESE, E ;

SPIEGEL, M .

CORROSION SCIENCE, 1995, 37 (07) :1023-1043

[10] Structural properties of liquid Fe-Si alloys [J].

Il'inskii, A ;

Slyusarenko, S ;

Slukhovskii, O ;

Kaban, I ;

Hoyer, W .

JOURNAL OF NON-CRYSTALLINE SOLIDS, 2002, 306 (01) :90-98

← 1 2 3 →