Surface integrity and residual stresses analysis by strain gages after hard turning process of case hardened steel aisi 8620

被引：0
作者：
Farias, A. [1 ]
Delijaicov, S. [2 ]
de Mello, J. D. B. [3 ]
Stipkovic Filho, M. [1 ]
Batalha, G. F. [1 ]
机构：
[1] Univ Sao Paulo, Escola Politecn, Dept Mechatron & Mech Syst Engn, Lab Mfg Engn, Av Prof Mello Moraes 2231, BR-05508970 Sao Paulo, Brazil
[2] Cent Univ FEI, Dept Mech Engn, BR-09850 Sao Berardo Do Campo, Brazil
[3] Univ Fed Uberlandia, Sch Mech Engn, BR-38400 Uberlandia, MG, Brazil
来源：
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS 1 AND 2 | 2010年 / 83-86卷
关键词：
Hard turning; Residual stresses; White layers; Surface Integrity;
D O I：
10.4028/www.scientific.net/AMR.83-86.718
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This work aims an analysis on the functional surface integrity resulting from turning mechanical components manufactured from case hardened steel AISI 8620 with 1 millimeter average layer depth and hardness of 58-62HRC. A cBN tool with PVD coat and Wiper geometry-edge was used for continuous turning of hardened steel, the cutting conditions (Vc [m/min] and fin [mm/rev]) used were concerned to reflect large running production of mechanical components.
引用
收藏
页码：718 / +
页数：2
相关论文
共 50 条
  • [41] Assessing near-dry lubrication (35 ml/h) performance in hard turning process of hardened (48 HRC) AISI 1060 carbon steel
    Panday, Goutam
    Ashraf, Md. Zurais Ibne
    Ibn Muneer, Khalid
    Hossain, Khandaker Shamail
    Ashik, Md. Fardian Kabir
    Kamruzzaman, M.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (5-8) : 2045 - 2057
  • [42] Assessing near-dry lubrication (35 ml/h) performance in hard turning process of hardened (48 HRC) AISI 1060 carbon steel
    Goutam Panday
    Md. Zurais Ibne Ashraf
    Khalid Ibn Muneer
    Khandaker Shamail Hossain
    Md. Fardian Kabir Ashik
    M. Kamruzzaman
    The International Journal of Advanced Manufacturing Technology, 2018, 99 : 2045 - 2057
  • [43] Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption
    Sayuti, Mohd
    Sarhan, Ahmed A. D.
    Salem, Faheem
    JOURNAL OF CLEANER PRODUCTION, 2014, 67 : 265 - 276
  • [44] Surface Integrity in Hard Machining of 300M Steel: Effect of Cutting-Edge Geometry on Machining Induced Residual Stresses
    Varela, P. I.
    Rakurty, C. S.
    Balaji, A. K.
    2ND CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2014, 13 : 288 - 293
  • [45] An in-depth analysis of tool wear mechanisms and surface integrity during high-speed hard turning of AISI D2 steel via novel inserts
    Khan, Sarmad Ali
    Ameer, Muhammad Faizan
    Uddin, Ghulam Moeen
    Ali, Muhammad Asad
    Anwar, Saqib
    Farooq, Muhammad Umar
    Alfaify, Abdullah
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 122 (9-10) : 4013 - 4028
  • [46] Strain measurement during laser surface cladding of low-carbon steel and analysis of residual stresses
    Grum, J
    Znidarsic, M
    ECRS 6: PROCEEDINGS OF THE 6TH EUROPEAN CONFERENCE ON RESIDUAL STRESSES, 2002, 404-7 : 437 - 442
  • [47] An in-depth analysis of tool wear mechanisms and surface integrity during high-speed hard turning of AISI D2 steel via novel inserts
    Sarmad Ali Khan
    Muhammad Faizan Ameer
    Ghulam Moeen Uddin
    Muhammad Asad Ali
    Saqib Anwar
    Muhammad Umar Farooq
    Abdullah Alfaify
    The International Journal of Advanced Manufacturing Technology, 2022, 122 : 4013 - 4028
  • [48] Experimental Investigation and Surface roughness Analysis on Hard turning of AISI D2 Steel using Coated Carbide Insert
    Srithar, A.
    Palanikumar, K.
    Durgaprasad, B.
    12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 72 - 77
  • [49] Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool
    Bouacha, Khaider
    Yallese, Mohamed Athmane
    Mabrouki, Tarek
    Rigal, Jean-Francois
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2010, 28 (03) : 349 - 361
  • [50] Analysis of the surface integrity when nitriding AISI 4140 steel by the sink electrical discharge machining (EDM) process
    Santos, Rogerio F.
    Silva, Ernane R.
    Sales, Wisley F.
    Raslan, Alberto A.
    3RD CIRP CONFERENCE ON SURFACE INTEGRITY, 2016, 45 : 303 - 306
12345