Evaluation of wood properties from six native species of forest plantations in Costa Rica

被引:44
作者
Tenorio, Carolina [1 ]
Moya, Roger [1 ]
Salas, Cynthia [1 ]
Berrocal, Alexander [1 ]
机构
[1] CIIBI ITCR, Escuela Ingn Forestal, Inst Tecnol Costa Rica, Apartado 159-7050, Cartago, Costa Rica
来源
BOSQUE | 2016年 / 37卷 / 01期
关键词
tropical species; Central America; wood variation; commercial wood; CHEMICAL-PROPERTIES; EXTRACTIVES; DRY;
D O I
10.4067/S0717-92002016000100008
中图分类号
Q14 [生态学(生物生态学)];
学科分类号
071012 ; 0713 ;
摘要
This study details information about physical, chemical and mechanical properties, drying, preservation and workability of wood from Cordia alliodora, Dipteryx panamensis, Enterolobium cyclocarpum, Hieronyma alchorneoides, Samanea saman and Vochysia ferruginea trees, growing in forest plantations in Costa Rica. Variation of the general properties in relation to height showed that heartwood percentage decreases, bark percentage increases and pith percentage is not affected. Dipteryx panamensis showed both the highest values for specific gravity and the highest mechanic resistance. Both chemical properties and extractives presence were different among species. Heartwood was not possible to preserve in any of the species, though sapwood was. Penetration varied from partial irregular or vascular in the species. The highest durability was for Hieronyma alchorneoides and Vochysia ferruginea, species classified as of high durability. Finally, all species had good performance in the workability tests. The previous results indicate that these species, used for trading reforestation in Costa Rica, have acceptable characteristics to be commercialized and used in wooden products.
引用
收藏
页码:71 / 84
页数:14
相关论文
共 37 条
[1]  
Abe I., 1982, Journal of the Japan Wood Research Society, V28, P535
[2]  
Acuerdo de Cartagena, 1976, NORM MET ACT TECN
[3]  
[Anonymous], IAWA J
[4]  
ASTM (American Society for Testing and Materials US), 2013, D111084 ASTM
[5]  
ASTM (American Society for Testing and Materials US), 2013, D110284 ASTM, P6
[6]  
ASTM (American Society for Testing and Materials US), 2005, D201781 ASTM
[7]  
ASTM (American Society for Testing and Materials US), 2013, D110796 ASTM
[8]  
ASTM (American Society for Testing and Materials US), 2013, D110984 ASTM
[9]  
ASTM (American Society for Testing and Materials US), 2014, D14314 ASTM
[10]  
ASTM (American Society for Testing and Materials US), 2011, D166611 ASTM