Toward recycling "unsortable" post-consumer WEEE stream: Characterization and impact of electron beam irradiation on mechanical properties

被引:12
作者
Belyamani, Imane [1 ]
Maris, Joachim [2 ,3 ]
Bourdon, Sylvie [2 ]
Brossard, Jean-Michel [2 ]
Cauret, Laurent [1 ]
Fontaine, Laurent [3 ]
Montembault, Veronique [3 ]
机构
[1] Pole Univ Montfoulon, Inst Super Plasturgie Alencon ISPA, BP 823, F-61041 Alencon, France
[2] Veolia Rech & Innovat, 291 Ave Dreyfous Ducas, F-78520 Limay, France
[3] Le Mans Univ, CNRS, Inst Mol & Mat Mans IMMM, UMR 6283, F-72085 Le Mans 9, France
关键词
Unsortable plastics; Post-consumer WEEE; Electron beam irradiation; Sampling method; Plastics recycling; Mechanical properties; EQUIPMENT WEEE; GAMMA-IRRADIATION; POLYMER BLENDS; CROSS-LINKING; WASTE; COMPATIBILIZATION; POLYETHYLENE; PLASTICS; CRYSTALLIZATION; POLYPROPYLENE;
D O I
10.1016/j.jclepro.2021.126300
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The work reported here is the first study aimed at providing a full screening of a real unsortable non recycled post-consumer WEEE stream free of brominated flame retarded plastics, separated using online X-ray detection, toward its recycling. In the existing sorting lines, up to 40% of plastics from waste electrical and electronic equipment (WEEE) stream can be rejected, herein named unsortable plastics. To have the most representative homogeneous sample for physico-chemical characterizations, a sampling method was developed to overcome the heterogeneity of the investigated 500 kg batch. The batch screening on both representative samples (-500 mu m size) and 100 plastic fractions (-20 mm size), by means of routine techniques used in the plastic industry, has allowed to quantify reliably the main polymers included in the studied batch;-50% styrene-based polymers,-15% polypropylene (PP),-15% polycarbonate (PC),-1e4% polyamide (PA), polyethylene (PE), polyvinyl chloride (PVC), poly (ethylene terephthalate) (PET), poly (methyl methacrylate) (PMMA) and-8% of multi-layer plastics, paints and thermosets. The identification of the-8.0% inorganic phase by X-ray fluorescence spectrometry revealed the presence of several additives/charges commonly incorporated in plastic materials, such as calcium carbonate and talc. The studied batch was then subjected to electron beam irradiation at 50 and 200 kGy doses, as a means of compatibilization between the batch components. The mechanical properties and thermal behavior of irradiated samples pointed out the crucial role of the residual free radical scavenger agents present in post-consumer WEEE streams, leading to significantly different properties compared to those of irradiated virgin polymer blends highlighted in the literature. (C) 2021 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
引用
收藏
页数:10
相关论文
共 65 条
  • [21] Kinetic studies of the decomposition of flame retardant containing high-impact polystyrene
    Grause, Guido
    Ishibashi, Jun
    Kameda, Tomohito
    Bhaskar, Thallada
    Yoshioka, Toshiaki
    [J]. POLYMER DEGRADATION AND STABILITY, 2010, 95 (06) : 1129 - 1137
  • [22] Gy P., 1998, Sampling for analytical purposes
  • [23] Hamaide T., 2014, ENV IMPACT POLYM
  • [24] Hennebert P., 2017, WEEE PLASTIC SORTING
  • [25] Molecular deformation mechanisms of isotactic polypropylene in α- and β-crystal forms by FTIR spectroscopy
    Huy, TA
    Adhikari, R
    Lüpke, T
    Henning, S
    Michler, GH
    [J]. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2004, 42 (24) : 4478 - 4488
  • [26] International Irradiation Association, 2011, IND RAD ELECT BEAMS
  • [27] An overview of LCA application in WEEE management: Current practices, progress and challenges
    Ismail, Haikal
    Hanafiah, Mania M.
    [J]. JOURNAL OF CLEANER PRODUCTION, 2019, 232 : 79 - 93
  • [29] Electronic waste recycling: A review of US infrastructure and technology options
    Kang, HY
    Schoenung, JM
    [J]. RESOURCES CONSERVATION AND RECYCLING, 2005, 45 (04) : 368 - 400
  • [30] Stability of ABS Compounds Subjected to Repeated Cycles of Extrusion Processing
    Karahaliou, E. -K.
    Tarantili, P. A.
    [J]. POLYMER ENGINEERING AND SCIENCE, 2009, 49 (11) : 2269 - 2275