Optimization of the Mechanical Properties and Residual Stresses in 2024 Aluminum Alloy Through Heat Treatment

被引：18

作者：

Araghchi, M. ^{[1
]}

Mansouri, H. ^{[1
]}

Vafaei, R. ^{[1
]}

Guo, Y. ^{[2
]}

机构：

[1] Malek Ashtar Univ Technol, Dept Mat Engn, Esfahan, Iran

[2] Univ Limerick, Mat & Surface Sci Inst, Limerick, Ireland

来源：

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2018年 / 27卷 / 07期

关键词：

2024 aluminum alloy; mechanical properties; polymeric solution quenchant; residual stresses; CU-MG ALLOYS; REDUCTION; PREDICTION; GROWTH;

D O I：

10.1007/s11665-018-3400-0

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Residual stresses induced during quenching of aluminum alloys cause dimensional instability and distortion. In this study, the effects of different concentrations of polyalkylene glycol (PAG) quenchants on residual stresses and mechanical properties of 2024 aluminum alloy were investigated. Surface residual stresses were measured by using hole-drilling strain-gauge method. Also, mechanical properties and microstructure of the heat-treated samples were analyzed using hardness measurements, tensile tests, and transmission electron microscopy. Results showed that quenching into a 15% polymeric solution and aging at 190 A degrees C for 12 h cause 50% reduction in residual stress as compared with quenching in water at 20 A degrees C and naturally aging. Moreover, tensile strength decreased by 104 MPa (similar to 20%) in compared with the T6 sample.

引用

页码：3234 / 3238

页数：5

共 27 条

[1]

[Anonymous], 1991, HEAT TREAT MET-UK

[2] A novel cryogenic treatment for reduction of residual stresses in 2024 aluminum alloy [J].

Araghchi, M. ;

Mansouri, H. ;

Vafaei, R. ;

Guo, Yina .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 689 :48-52

[3]

Black R., 1996, Methods for investigating localized clustering of disease, P28

[4]

Croucher T., 1983, HEAT TREATING, V15, P30

[5]

Croucher T., 2010, ASTM SPEC TECH PUBL, P309, DOI [10.1520/stp49157s, DOI 10.1520/STP49157S]

[6]

Croucher T., 2010, RESIDUAL STRESS DIST

[7] Precipitation process along dislocations in Al-Cu-Mg alloy during artificial aging [J].

Feng, Zongqiang ;

Yang, Yanqing ;

Huang, Bin ;

Han, Ming ;

Luo, Xian ;

Ru, Jigang .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 528 (02) :706-714

[8] Characterization of 2024-T3: An aerospace aluminum alloy [J].

Huda, Zainul ;

Taib, Nur Iskandar ;

Zaharinie, Tuan .

MATERIALS CHEMISTRY AND PHYSICS, 2009, 113 (2-3) :515-517

[9] Cooling Characteristic of Polymeric Quenchant: Calculation of HTC and Prediction of Microstructure and Hardness [J].

Ikkene, Rafika ;

Koudil, Zahia ;

Mouzali, Mohammed .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (11) :3819-3830

[10] Prediction of residual stresses in quenched aluminum blocks and their reduction through cold working processes [J].

Koc, Muammer ;

Culp, John ;

Altan, Taylan .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 174 (1-3) :342-354

← 1 2 3 →