Influence of temperature and thickness on the off-axis behaviour of short glass fibre reinforced polyamide 6.6-Quasi-static loading

被引：88

作者：

De Monte, M. ^{[1
]}

Moosbrugger, E. ^{[1
]}

Quaresimin, M. ^{[2
]}

机构：

[1] Robert Bosch GmbH, Plast Engn CR APP2, Adv Prod Technol 1, Corp Sector Res & Adv Engn, D-71301 Waiblingen, Germany

[2] Univ Padua, Dept Management & Engn, I-36100 Vicenza, Italy

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2010年 / 41卷 / 07期

关键词：

Polymer-matrix composites; Anisotropy; Mechanical properties; Strength; INJECTION-MOLDED SHORT; FRACTURE-TOUGHNESS; FATIGUE BEHAVIOR; ORIENTATION; COMPOSITES;

D O I：

10.1016/j.compositesa.2010.02.018

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper investigates the anisotropic behaviour of mechanical properties of a short glass fibre reinforced polyamide 6.6 (PA66-GF35) under quasi-static loading. For this purpose tensile tests were carried out on dog-bone specimens, machined out from injection moulded plates 80 x 80 mm, of three different thicknesses t(1-3 mm) at eight different orientation angles. The tests were performed at room temperature as well as at 130 degrees C. Material elastic constants were estimated from fitting experimental tensile moduli according to the theory of elasticity for orthotropic materials. A fit on geometrical tensile strengths with the Tsai-Hill failure criterion provided instead the material strength parameters. Both specimen thickness and temperature appear to have a strong influence on mechanical properties and degree of anisotropy. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：859 / 871

页数：13

共 25 条

[1] THE USE OF TENSORS TO DESCRIBE AND PREDICT FIBER ORIENTATION IN SHORT FIBER COMPOSITES [J].

ADVANI, SG ;

TUCKER, CL .

JOURNAL OF RHEOLOGY, 1987, 31 (08) :751-784

[2]

[Anonymous], 1996, 5271 ISO

[3] Effect of fibre orientation on the fatigue behaviour of a short glass fibre reinforced polyamide-6 [J].

Bernasconi, A. ;

Davoli, P. ;

Basile, A. ;

Filippi, A. .

INTERNATIONAL JOURNAL OF FATIGUE, 2007, 29 (02) :199-208

[4]

Davidson N. C., 2003, P 18 STUTTG KUNSTST

[5] Multiaxial fatigue of a short glass fibre reinforced polyamide 6.6-Fatigue and fracture behaviour [J].

De Monte, M. ;

Moosbrugger, E. ;

Jaschek, K. ;

Quaresimin, M. .

INTERNATIONAL JOURNAL OF FATIGUE, 2010, 32 (01) :17-28

[6]

DEMONTE M, COMPOSITE A, DOI DOI 10.1016/J.COMPOSITESA.2010.02.004

[7]

DEMONTE M, MULTIAXIAL FAT UNPUB

[8] Automated reconstruction of curvilinear fibres from 3D datasets acquired by X-ray microtomography [J].

Eberhardt, CN ;

Clarke, AR .

JOURNAL OF MICROSCOPY-OXFORD, 2002, 206 :41-53

[9] Fibre orientation effects on the fracture of short fibre polymer composites: on the existence of a critical fibre orientation on varying internal material variables [J].

Fara, S ;

Pavan, A .

JOURNAL OF MATERIALS SCIENCE, 2004, 39 (11) :3619-3628

[10] MICROSTRUCTURAL EFFICIENCY AND FRACTURE-TOUGHNESS OF SHORT FIBER THERMOPLASTIC MATRIX COMPOSITES [J].

FRIEDRICH, K .

COMPOSITES SCIENCE AND TECHNOLOGY, 1985, 22 (01) :43-74

← 1 2 3 →