Diesel engine optimization with multi-objective performance characteristics by non-evolutionary Nelder-Mead algorithm: Sobol sequence and Latin hypercube sampling methods comparison in DoE process

被引:67
作者
Navid, Ali [1 ]
Khalilarya, Shahram [1 ]
Abbasi, Mohammad [1 ]
机构
[1] Urmia Univ, Dept Mech Engn, Fac Engn, Orumiyeh, Iran
关键词
Diesel engine; Optimization; Nelder-Mead algorithm; Sobol sequence; Latin hypercube; Comparison; COMBUSTION-CHAMBER; LOW-DISCREPANCY; IGNITION; HYDROGEN; NLPQL; MODEL;
D O I
10.1016/j.fuel.2018.04.142
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
This research deals with the diesel engine optimization by Nelder-Mead algorithm and initial points distribution done by Sobol sequence and Latin hypercube sampling methods. Nelder-Mead algorithm is a non-evolutionary algorithm which needs some initial points in order to start the optimization process and then understand the relationship between input parameters and output objective functions. In this study, these points are produced once by Sobol sequence and once by Latin Hypercube in order to make a comparison between these two sequences and investigate the effect of sequence on the results. The input parameters are Da (outer bowl diameter), Dm (bowl middle diameter), Tm (bowl center depth), nozzle hole half outer cone angle and nozzle hole outer diameter, and objective functions are combustion noise, swirl and indicated torque. Final results show that although in both cases the results are close to each other, in Sobol mode it takes just 7 RunIDs (Run Identification) to find the solution but in Latin Hypercube method the algorithm needs 27 RunIDs to find the solution. In both cases almost the combustion noise changes just 0.2%, swirl improves 20.4% and the indicated torque increases about 7.65%.
引用
收藏
页码:349 / 367
页数:19
相关论文
共 32 条
  • [1] Cost effective simulation-based multiobjective optimization in the performance of an internal combustion engine
    Aittokoski, Timo
    Miettinen, Kaisa
    [J]. ENGINEERING OPTIMIZATION, 2008, 40 (07) : 593 - 612
  • [2] Clustering aided approach for decision making in computationally expensive multiobjective optimization
    Aittokoski, Timo
    Ayramo, Sami
    Miettinen, Kaisa
    [J]. OPTIMIZATION METHODS & SOFTWARE, 2009, 24 (02) : 157 - 174
  • [3] [Anonymous], 2014, FIR SOFTW HELP AVL V
  • [4] [Anonymous], 1992, SIAM, DOI DOI 10.1137/1.9781611970081.FM
  • [5] [Anonymous], 2014, FIR SOFTW HELP AVL V
  • [6] [Anonymous], 1967, ZH VYCHISL MAT MAT P
  • [7] The multi-objective optimization of combustion chamber of DI diesel engine by NLPQL algorithm
    Chen, Yue
    Lv, Lin
    [J]. APPLIED THERMAL ENGINEERING, 2014, 73 (01) : 1332 - 1339
  • [8] CFD Modeling of a Mixed Mode Boosted GDI Engine and Performance Optimization for the Avoidance of Knocking
    Costa, Michela
    Sorge, Ugo
    Sementa, Paolo
    Vaglieco, Bianca Maria
    [J]. SIMULATION AND MODELING METHODOLOGIES, TECHNOLOGIES AND APPLICATIONS, SIMULTECH 2014, 2015, 402 : 195 - 215
  • [9] Dukowicz JK., INFORMAL REPORT ALAM
  • [10] Ferguson ColinR., 2004, Internal Combustion Engines-Applied Thermal Sciences, VSecond