Synthesis of low-cost Ti4O7 membrane electrode for electrooxidation of tetracycline under flow-through conditions: Performance, kinetics and mechanism

The high cost of anode material and the limitation of liquid-mass transfer on anode surface in electro-chemical advanced oxidation processes always restrict the removal efficiency of organics. To overcome the limitations, this study synthesized a low-cost Ti4O7 membrane electrode by simple sol-gel method, and developed a flow-through electrooxidation system based on Ti4O7 membrane electrode. The membrane electrode presented high crystallinity, high specific surface area (10.18 m(2)/g), concentrated pore sizes distribution (0.1-1 mu m), and high oxygen evolution potential (2.2 V vs. SHE). Furthermore, compared with stirring conditions, the flow-through conditions could enhance the liquid-mass transfer on anode surface, resulting in a high tetracycline degradation efficiency (97.24%) and a low energy consumption (0.18 kWh/ gDOC). High degradation rates of tetracycline (more than 95%) were both observed with the initial tetra-cycline concentration ranged from 10 to 50 mg/L. The increase of pipeline pressure and current density had positive influence on tetracycline degradation. Hydroxyl radicals and sulfate radicals produced on the electrode surface are the main oxidants for tetracycline degradation. The degradation pathway of tetra-cycline included oxygenation, hydroxylation, demethylation, decarbonylation, ring-open, and C-N bond cleavage. Compared with materials prepared by conventional hot pressing and plasma spraying method, this simply synthesized Ti4O7 membrane electrode exhibited efficient oxidation capability and competitive electric cost for contaminants degradation, demonstrating its practicability, feasibility, and facilitation for the potential application. (C)& nbsp;2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.