Experimental studies on composite bricks using black cotton soil, fly ash and granite waste

被引:3
作者
Kumar, D. Chandan [1 ]
Vasanthi, P. [1 ]
Devaraju, A. [2 ]
机构
[1] Adhi Coll Engn & Technol, Dept Civil Engn, Kanchipuram, India
[2] Adhi Coll Engn & Technol, Dept Mech Engn, Kanchipuram, India
关键词
Bricks; Manufacturing; Industrial waste; Block cotton soil; Fly ash; Granite waste; Modern bricks;
D O I
10.1016/j.matpr.2020.10.663
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this present revision, an attempt has been prepared to include industrial wastes into the production of bricks using black cotton soil (BS), granite waste (GW) and fly ash (FA). Reusing such trashes by including them into construction materials is an applied solution for environmental toxic waste problems. This article represents the utilization of industrial waste in manufacturing of composite bricks and it can be used in building construction, the pollution and disposal problems can be reduced significantly. A new approach to the production of brick was carried out by using black cotton soil (BS), fly ash (FA) and granite waste (GW). The major problem in construction fields is the non-availability of adequate amount of construction materials on one side and on the other side disposal of waste material and dumping of granite waste causing a major environmental problem. It was detected from the experimental results. The mixture of block cotton soil (BS) brick has altered percentage of the FA and GW adding like 0%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%. In the analysis of the block cotton soil brick there are main four kind of the analysis is done. Compressive strength test, efflorescence test, water absorption test and weight analysis after burning the bricks. (C) 2020 The Authors. Published by Elsevier Ltd.
引用
收藏
页码:868 / 874
页数:7
相关论文
共 16 条
  • [1] Akhtar Mohammad Nadeem, 2018, FLY ASH RESOURCE MAT
  • [2] Appukutty P., 2009, INT J DESIGN MANUF T, V3
  • [3] Babu S.V. Giri, 2018, MANUFACTURING ECO FR, V08, P2250
  • [4] Gidigasu S.S.R., STANDARD SCI RES ESS, V1, P377
  • [5] Hegazy Badr El-Din E., 2012, AUSTR J BASIC APPL S, V6
  • [6] Large Signal Lyapunov-Based Stability Studies in Microgrids: A Review
    Kabalan, Mahmoud
    Singh, Pritpal
    Niebur, Dagmar
    [J]. IEEE TRANSACTIONS ON SMART GRID, 2017, 8 (05) : 2287 - 2295
  • [7] Kulkarni Apurva, 2013, INT J ENG TRENDS TEC, V4
  • [8] Effect of the Extrusion Ratio on the Mechanical Properties of As-Forged Mg-8A1-0.5Zn Alloy
    Lee, Youngseon
    Lee, Sang-ik
    Yoon, Jonghun
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2015, 2 (03) : 275 - 280
  • [9] Liu Henry, 2003, INT UT S CTR APPL EN
  • [10] Mawlood Yousif, 2010, EFFECT DRYING METHOD, V22