Friction Spot Joining of aluminum alloy 2024-T3 and carbon-fiber-reinforced poly(phenylene sulfide) laminate with additional PPS film interlayer: Microstructure, mechanical strength and failure mechanisms

被引：115

作者：

Andre, Natalia M. ^{[1
]}

Goushegir, Seyed M. ^{[2
]}

dos Santos, Jorge F. ^{[2
]}

Canto, Leonardo B. ^{[1
]}

Amancio-Filho, Sergio T. ^{[2
,3
]}

机构：

[1] Fed Univ Sao Carlos UFSCar, Postgrad Program Mat Sci & Engn, Sao Carlos, SP, Brazil

[2] Helmholtz Zentrum Geesthacht, Inst Mat Res, Ctr Mat & Coastal Res, Mat Mech,Solid State Joining Proc, D-21502 Geesthacht, Germany

[3] Hamburg Univ Technol, Inst Polymer Composites, Hamburg, Germany

来源：

COMPOSITES PART B-ENGINEERING | 2016年 / 94卷

基金：

巴西圣保罗研究基金会;

关键词：

Friction Spot Joining; Polymer-matrix composites (PMCs); Mechanical properties; Microstructure; Joints/joining; PROCESS PARAMETERS; BEHAVIOR;

D O I：

10.1016/j.compositesb.2016.03.011

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Friction Spot Joining is an innovative friction-based joining technique for metal polymer hybrid structures. In this work, aluminum alloy 2024-T3 and CF-PPS friction-spot joints were produced with additional PPS film interlayer. The joints were investigated in terms of the microstructure, mechanical performance under quasi-static loading and failure mechanisms. Macro- and micro-mechanical interlocking as well as adhesion forces were identified to dictate bonding mechanisms in the FSp joint with film interlayer. The ultimate lap shear force of the joints (2700 +/- 115 N up to 3070 +/- 165 N) were 20% -55% higher than the corresponding joints without interlayer, due to the larger bonding area, better load distribution and improved micro-mechanical interlocking. The failure analysis of the joints revealed a mixture of adhesive-cohesive failure, whereas cohesive failure was dominant. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：197 / 208

页数：12

共 29 条

[1] Resistance welding of metal/thermoplastic composite joints [J].

Ageorges, C ;

Ye, L .

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2001, 14 (06) :449-475

[2] On the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structures [J].

Amancio-Filho, S. T. ;

Bueno, C. ;

dos Santos, J. F. ;

Huber, N. ;

Hage, E., Jr. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (10-11) :3841-3848

[3]

Amancio-Filho S.T., 2012, European Patent, Patent No. [2329905B1, 2329905]

[4] Preliminary Investigation of the Microstructure and Mechanical Behaviour of 2024 Aluminium Alloy Friction Spot Welds [J].

Amancio-Filho, Sergio T. ;

Camillo, Ana P. C. ;

Bergmann, Luciano ;

dos Santos, Jorge F. ;

Kury, Sebastiao E. ;

Machado, Nelson G. A. .

MATERIALS TRANSACTIONS, 2011, 52 (05) :985-991

[5]

Andre NM, 2015, C BRAS POL NAT RN BR

[6]

[Anonymous], 2009, CETEX PPS TECHN DAT

[7]

[Anonymous], 2012, AL 2024 T3 TECHN DAT

[8]

[Anonymous], 2014, P ANN TECHN C SOC PL

[9]

[Anonymous], 2009, PPS FILM TECHN DAT

[10]

[Anonymous], BMW I3 INS STOR WHAT

← 1 2 3 →