Ion irradiation combined with nanoindentation as a screening test procedure for irradiation hardening

Ion irradiation has long been recognized as a means to efficiently approximate neutron damage in structural materials. Likewise, nanoindentation has long been recognized as a tool to probe the mechanical behaviour of thin layers. The combination of both techniques in order to establish a screening test procedure for the resistance of ferritic/martensitic (f/m) steels to neutron damage in terms of hardening requires consideration of a number of details. The objective is to specify one among several possible variants of such a screening test. Important constituents of the approach include: (1) the design of the ion irradiation experiments, e.g. using the Monte Carlo binary collision code SRIM, (2) nanoindentation testing over a large range of indentation depths, and (3) proper consideration of the indentation size effect, the substrate effect and the pile-up effect. An elastic-modulus-based correction of the contact area was rationalized. A version of the overall approach sketched above was applied to unirradiated, self-ion-irradiated and neutron-irradiated samples of the 9% Cr f/m steel T91. Apparently, this is the first direct comparison of nanoindentation results obtained for samples of the same f/m steel irradiated with ions and neutrons at the same temperature (200 degrees C) and up to about the same fluence (2.5 dpa versus 2.31 dpa). The findings indicate that the indentation hardness increase is significant and agrees within the range of errors. (C) 2015 Elsevier B. V. All rights reserved.