Joining of tungsten with low-activation ferritic-martensitic steel and vanadium alloys for demo reactor

被引：25

作者：

Bachurina, Diana ^{[1
]}

Suchkov, Alexey ^{[1
]}

Kalin, Boris ^{[1
]}

Sevriukov, Oleg ^{[1
]}

Fedotov, Ivan ^{[1
]}

Dzhumaev, Pavel ^{[1
]}

Ivannikov, Alexander ^{[1
]}

Leont'eva-Smirnova, Maria ^{[1
,2
]}

Mozhanov, Eugene ^{[2
]}

机构：

[1] Natl Res Nucl Univ MEPhI, Dept Mat Sci, Moscow 115409, Russia

[2] Bochvar High Technol Res Inst Inorgan Mat, Ul Rogova 5, Moscow 123098, Russia

来源：

NUCLEAR MATERIALS AND ENERGY | 2018年 / 15卷

关键词：

Tungsten-steel joint; Diffusion brazing; DEMO; Plasma facing component; FEM simulation; MECHANICAL-PROPERTIES; MICROSTRUCTURE; POWDERS; EK-181;

D O I：

10.1016/j.nme.2018.03.010

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

The conceptual designs of the blanket and the helium-cooled divertor of the DEMO reactor require joining of reduced activation steel (for example RUSFER EK-181, EUROFER, etc.) and tungsten. Significant differences in their physical properties can lead to the generation of the stresses during cooling and, as a result, to the failure of the joint. In this paper, diffusion brazing of RUSFER EK-181 steel with tungsten using a V-4Ti-4Cr interlayer was obtained. Rapidly-quenched ribbon brazing alloys based on copper of various compositions were used. Brazing was carried out in vacuum furnaces at temperatures in the range of 800-1000 degrees C. The structural-phase states of the joints obtained were studied, the microhardness was measured, and thermocycling tests were performed in the interval of 700 to 25 degrees C. FEM simulation was used to calculate the optimal thickness of the interlayer.

引用

页码：135 / 142

页数：8

共 31 条

[1] Manufacturing and joining technologies for helium cooled divertors [J].

Aktaa, J. ;

Basuki, W. W. ;

Weber, T. ;

Norajitra, P. ;

Krauss, W. ;

Konys, J. .

FUSION ENGINEERING AND DESIGN, 2014, 89 (7-8) :913-920

[2] Process optimization for diffusion bonding of tungsten with EUROFER97 using a vanadium interlayer [J].

Basuki, Widodo Widjaja ;

Aktaa, Jarir .

JOURNAL OF NUCLEAR MATERIALS, 2015, 459 :217-224

[3] Microstructure, residual stresses and mechanical properties of diffusion bonded tungsten-steel joint using a V/Cu composite barrier interlayer [J].

Cai, Qingshan ;

Liu, Wensheng ;

Ma, Yunzhu ;

Liu, Haoyang .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 :312-317

[4] Mechanical characterization and modeling of brazed EUROFER-tungsten-joints [J].

Chehtov, T. ;

Aktaa, J. ;

Kraft, O. .

JOURNAL OF NUCLEAR MATERIALS, 2007, 367 (SPEC. ISS.) :1228-1232

[5] Structural materials for fusion power reactors -: the RF R&D activities [J].

Chernov, V. M. ;

Leonteva-Smirnova, M. V. ;

Potapenko, M. M. ;

Budylkin, N. I. ;

Devyatko, Yu. N. ;

Ioltoukhovskiy, A. G. ;

Mironova, E. G. ;

Shikov, A. K. ;

Sivak, A. B. ;

Yermolaev, G. N. ;

Kalashnikov, A. N. ;

Kuteev, B. V. ;

Blokhin, A. I. ;

Loginov, N. I. ;

Romanov, V. A. ;

Belyakov, V. A. ;

Kirillov, I. R. ;

Bulanova, T. M. ;

Golovanov, V. N. ;

Shamardin, V. K. ;

Strebkov, Yu. S. ;

Tyumentsev, A. N. ;

Kardashev, B. K. ;

Mishin, O. V. ;

Vasiliev, B. A. .

NUCLEAR FUSION, 2007, 47 (08) :839-848

[6] Structure-Phase Transformations and Physical Properties of Ferritic-Martensitic 12% Chromium Steels EK-181 and ChS-139 [J].

Chernov, V. M. ;

Leont'eva-Smirnova, M. V. ;

Potapenko, M. M. ;

Polekhina, N. A. ;

Litovchenko, I. Yu. ;

Tyumentsev, A. N. ;

Astafurova, E. G. ;

Khromova, L. P. .

TECHNICAL PHYSICS, 2016, 61 (01) :97-102

[7] Improvements in W-Eurofer first wall brazed joint using alloyed powders fillers [J].

de Prado, J. ;

Sanchez, M. ;

Urena, A. .

FUSION ENGINEERING AND DESIGN, 2017, 124 :1082-1085

[8] Evaluation of mechanically alloyed Cu-based powders as filler alloy for brazing tungsten to a reduced activation ferritic-martensitic steel [J].

de Prado, J. ;

Sanchez, M. ;

Urena, A. .

JOURNAL OF NUCLEAR MATERIALS, 2017, 490 :188-196

[9] Development of brazing process for W-EUROFER joints using Cu-based fillers [J].

de Prado, J. ;

Sanchez, M. ;

Urena, A. .

PHYSICA SCRIPTA, 2016, T167

[10] Surface modification of low activation ferritic-martensitic steel EK-181 (Rusfer) by high temperature pulsed plasma flows [J].

Emelyanova, O. V. ;

Dzhumaev, P. S. ;

Yakushin, V. L. ;

Kalin, B. A. ;

Ganchenkova, M. G. ;

Khein, A. T. ;

Leontyeva-Smirnova, M. V. ;

Valiev, R. Z. ;

Enikeev, N. A. ;

Shao, L. ;

Aydogan, E. ;

Short, M. ;

Garner, F. .

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2015, 365 :218-221

← 1 2 3 4 →