Research State-of-the-Art on Controlling Ti-Al Intermetallic Compound (IMC) Formation During the Laser Beam Welding (LBW) of Ti and Al Alloys

被引:0
|
作者
Yu, D-S [1 ]
Zhou, J-P [1 ]
Zhang, Y. [1 ]
机构
[1] Xinjiang Univ, Sch Mech Engn, 666 Shengli Rd, Wulumuyi 830000, Xinjiang Uyghur, Peoples R China
关键词
Laser beam welding (LBW); Ti alloy; Al alloy; Ti-Al joints; intermetallic compound (IMC); MECHANICAL-PROPERTIES; MICROSTRUCTURE; TEMPERATURE; JOINT; LAYER;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Ti-Al dissimilar metal composite structures have the advantages of the low density of Al alloys and the high strength and good corrosion resistance of Ti alloys, thereby reducing structural weight and saving energy in manufacturing. The joining of Ti and Al alloys, however, is faced with great difficulty due to the differences in physical and chemical properties between the two materials. Brittle intermetallic compound (IMC) formation in the welds decrease the ductility and formed cracks in the Ti/Al joints. The research results show that the welding with filler can reduce the content of brittle TiAl3 phase in the interface compared with the unfilled welding process. This paper introduced the research status of Ti and Al alloy welding structures and the mechanism of controlling Ti-Al IMCs by different welding structure in laser beam welding (LBW). The research situation and the control methods of brittle Ti-Al IMCs are discussed.
引用
收藏
页码:299 / 308
页数:10
相关论文
共 45 条
  • [41] Study on the formation mechanism of fine equiaxed grain ribbons along the fusion lines during 2060/2099 Al-Li alloys dual laser-beam synchronous welding process
    Liu, Ting
    Zhan, Xiaohong
    Fu, Renli
    Liu, Dongtao
    MATERIALS RESEARCH EXPRESS, 2019, 6 (12)
  • [42] Influence of Heat Input on Welding Processes, Weld Formation, Microstructure, and Mechanical Properties of Double- Sided Laser Beam Welded Ti-6Al-4V Alloy T-Joints
    Ma, Xuyi
    Duan, Aiqin
    Lu, Wei
    Wang, Xuedong
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2021, 50 (07): : 2300 - 2307
  • [43] Influence of Heat Input on Welding Processes, Weld Formation, Microstructure, and Mechanical Properties of Double-Sided Laser Beam Welded Ti-6Al-4V Alloy T-Joints
    Ma Xuyi
    Duan Aiqin
    Lu Wei
    Wang Xuedong
    RARE METAL MATERIALS AND ENGINEERING, 2021, 50 (07) : 2300 - 2307
  • [44] Numerical investigation on keyhole stability and weld pool dynamics during quasi-continuous laser beam welding of Ti6Al4V plate using constant and modulated high-frequency pulsed heat input
    Chen, Jicheng
    Chen, Xiaomei
    Liu, Xuejun
    Wei, Yanhong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (1-2): : 229 - 247
  • [45] Numerical investigation on keyhole stability and weld pool dynamics during quasi-continuous laser beam welding of Ti6Al4V plate using constant and modulated high-frequency pulsed heat input
    Jicheng Chen
    Xiaomei Chen
    Xuejun Liu
    Yanhong Wei
    The International Journal of Advanced Manufacturing Technology, 2022, 121 : 229 - 247